HI-6105 Electric Field Probe
​ETS-Lindgren's laser-powered HI-6105 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6105 can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed.

 

 


​ETS-Lindgren's laser-powered HI-6105 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6105 can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed.​

Fiber optic signal and power lines link the Model HI-6105 field probe to either the model HI-6100 Field Monitor, or as a direct connect to a PC USB port with the HI-6113 Laser Data Interface and ProbeView™ Laser Software.

The HI-6100 Field Monitor provides manual functions and programmed control via IEEE-488 and RS-232 Serial Data Interfaces. Readings from up to four probes can be displayed simultaneously.

The EMCenter™ Modular RF Platform along with the EMSense™ interface card can be used with the HI-6000 series field probes as a Field Monitor in addition to its capability as a system level platform.​​​

The HI-6113 Laser Data Interface provides the laser power and communications for the HI-6105 Electric Field Probe. A USB connection to the PC allows for quick and easy data collection, using ProbeView for Laser Probes software.

Key Product Information


Specifications Select a tab below for more information



Detection: Isotropic (X, Y and Z Axis Readings) 
Frequency Range: 100 kHz to 6 GHz 
Frequency Response with Correction: 100 kHz to 6 GHz ± 0.9 dB
Frequency Response: 
  • (Typical) 100 kHz to 2 GHz +1.0, -3.5 dB
  • 2 GHz to 5.5 GHz +3.5, -4.0 dB
  • 5.5 GHz to 6 GHz +2.0, -6.5 dB
Dynamic Range:  0.5 V/m to 800 V/m (Single Range) 
Resolution: 0.01 V/m 
Isotropic Deviation: ±0.5 dB @ 400 MHz 
Linearity: ±0.5 dB (1 to 800 V/m)   
Sample Rate (Typical): 70 Samples per Second Maximum   
Overload Withstand: >1500 V/m CW
Physical Interface:
  • Duplex Optical Fiber (62.5 Micron Multimode)
  • FC Connectors for Laser Cable, Integral 1m Optical Cable
  • ST Connector for Transmitter Cable, Integral 1m Optical Cable
Operating Range: 10°C to 40°C (50° F to 104° F); 5 to 95% Relative Humidity Non-condensing 
Dimensions (Housing): 32 mm x 32 mm x 32 mm; (1.26 in x 1.26 in x 1.26 in) 
Mounting:  1/4 in - 20 UNC Internal Thread         
  • Manual
  • Probe Assembly
  • A2LA Traceable Calibration Report
  • 10m Optical Cable
  • Bulkhead Connector (2)
  • Carrying Case
  • Fiber Cleaning Kit and Swabs

​HI-6100 Field Monitor Interface Card (H-491277)

Fiber Optic Maintenance Kit (112333)

Probe Stand (H-491269)

Extra Probe Carriers for above Probe Stand (H-491276)

EMCenter Interface Card (125428) 

 

 

 

 

 

HI-6105 Electric Field Probe http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900304HI-6105 Electric Field Probe
HI-6006 Electric Field Probe with Field-Replaceable Battery http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900307HI-6006 Electric Field Probe with Field-Replaceable Battery
HI-6053 Electric Field Probe http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900303HI-6053 Electric Field Probe
HI-6023 Electric Field Probe with Field-Replaceable Battery http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900308HI-6023 Electric Field Probe with Field-Replaceable Battery
HI-6122 Electric Field Probe http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900305HI-6122 Electric Field Probe
HI-6153 Electric Field Probe http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900306HI-6153 Electric Field Probe

Key Features


  • Laser Powered -Permits Extended Testing
  • Frequency Response: 
    • 100 kHz to 6 GHz
    • Dynamic Range 0.5 V/m to 800 V/m (Single Range) 
  • Provides Individual and Summed Axis Values
  • A2LA Accredited Calibration Report
  • Suitable for MIL Standard Specs:
    •  MIL-STD 461F Radiated Susceptibility (RS) 
  • Suitable for Automotive Specs:
    • SAE J1113 27
    • GMW 3091/3097/3103
    • FORD FMC 1278
  • Suitable for Commercial Specs: EN/IEC 61000-4-3 Radiated Immunities
  • Operates with Most 3rd Party Immunity Software

 

    • For High Field and High Frequency Requirements the Model HI-6x53 is Recommended

Literature and Videos


 

 

http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900304<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/probes-monitors/emc-probes/electric-field-probes/9003/900304

L o a d i n g

 Catalog-Item Reuse