Product Image

Key Features

  • Fast Performance: Up to 1 Million Samples per Second Measured Continuous Wave
  • Accurate Measurements with Dynamic Range of:
    • 65 dB for 6 GHz Model (Model 7002-002)
    • 55 dB for 18 GHz Model (Model 7002-004)
  • Low Measurement Uncertainty
  • Download PDF Datasheet
  • ETS-Lindgren's EMPower Power Meters make fast, accurate power measurements, even at low power levels. The EMPower modular plug-in card occupies one slot in the EMCenter, and includes four USB ports, accommodating any combination of up to four EMPower or EMPower Pulse sensors. Alternatively, an EMPower sensor can be connected directly to a PC using a standard USB port and included software.

    Both power meters have an accuracy of 0.25 dB, making them suitable for measurements in accordance to automotive, military, telecom, and basic EMC standards.

    EMPower is fully supported by TILE!, EMQuest, and other test automation software packages. Please contact ETS-Lindgren for additional information.

    Specifications
    View the EMPower Power Meters Model 7002-002 & -004 technical specifications below

    Physical Specifications

    Model
    7002-001 (Modular Plug-in Card)7002-002 (Sensor)7002-004 (Sensor)
    Temperature Range (Use)
    0 C to +40 C
    (32 F to 104 F)
    0 C to +40 C
    (32 F to 104 F)
    0 C to +40 C
    (32 F to 104 F)
    Temperature Range (Storage)
    -20 C to +85 C
    (4 F to 185 F)
    -20 C to +85 C
    (4 F to 185 F)
    -20 C to +85 C
    (4 F to 185 F)
    Relative Humidity
    10 to 90% (Non-condensing)
    10 to 90% (Non-condensing)
    10 to 90% (Non-condensing)
    Connector to Plug-in Card or PC (Data)
    n/a
    USB-B
    USB-B
    USB Communication
    n/a
    USB 1.1
    USB 1.1
    USB Power Consumption
    n/a
    < 200 mA
    < 200 mA
    RF Input Connector
    n/a
    N-type Precision
    N-type Precision

    Electrical Specifications

    Model
    7002-002 (Sensor)7002-004 (Sensor)
    Detector Type
    Diode
    Diode
    Measurement FunctionRMS CW PowerRMS CW Power
    Calibrated Frequency Range
    9 kHz to 6 GHz80 MHz to 18 GHz
    Power Measuring Range
    -55 dBm to +10 dBm
    -45 dBm to +10 dBm
    Input Damage Level
    >20 dBm
    >20 dBm
    Resolution
    0.01 dB
    0.01 dB
    VSWR
    <1.05 @ 10 MHz to 100 MHz
    <1.15 @ 100 MHz to 2 GHz
    <1.35 @ 2 GHz to 6 GHz
    <1.20 @ 80 MHz to 10 GHz
    <1.35 @ 10 GHz to 18 GHz
    Maximum Linearity Error (0 dBm ref)
    0.05 dB/10 dB
    0.05 dB/10 dB
    Measuring Speed (Per Second)
    20K, 100K or 1 M
    20K, 100K or 1 M
    Accuracy (23 2 C)
    0.25 dB
    0.25 dB ( 10 GHz)
    0.50 dB (> 10 GHz)
    Temperature Effect
    < 0.15 dB Over Full Temperature Range
    < 0.15 dB Over Full Temperature Range
    Measurement Units
    dBm
    dBm

    Product Configuration

    • EMPower RF Power Pulse Sensor (Please Specify Model)
    • 2 m Shielded USB Cable
    • Installation CD