Product Image

Key Features

  • Fast Performance: Up to 1 Million Samples per Second
  • Accurate Measurements with Dynamic Range of:
    • -65 dB for 6 GHz Model (Model 7002-003)
    • -55 dB for 18 GHz Model (Model 7002-005)
  • Pulse-shaped Recording Mode Suitable for Ford Radar Pulse Test
  • Download PDF Datasheet
  • ETS-Lindgren's EMPower Pulse RF/Burst Power Meter is designed to perform very fast measurements on high-frequency pulse-shaped signals (RF bursts).

    The EMPower modular plug-in card occupies one slot in the EMCenter, and includes four USB ports, accommodating any combination of up to four EMPower or EMPower Pulse sensors. Alternatively, an EMPower Pulse sensor can be connected directly to a PC using a standard USB port and included software.

    Both power meters have an accuracy of 0.25 dB, making them suitable for measurements in accordance to automotive, military, telecom, and basic EMC standards.

    EMPower Pulse is fully supported by TILE!, EMQuest, and other test automation software packages. Please contact ETS-Lindgren for additional information.

    Specifications
    View the EMPower Pulse RF/Burst Power Meter Model 7002-003 & -005 technical specifications below

    Physical Specifications

    Model
    7002-001 (Modular Plug-in Card) 7002-003 (Sensor) 7002-005 (Sensor)
    Temperature Range (Use)
    0 C to +40 C
    (32 F to 104 F)
    0 C to +40 C
    (32 F to 104 F)
    0 C to +40 C
    (32 F to 104 F)
    Temperature Range (Storage)
    -20 C to +85 C
    (4 F to 185 F)
    -20 C to +85 C
    (4 F to 185 F)
    -20 C to +85 C
    (4 F to 185 F)
    Relative Humidity
    10 to 90% (Non-condensing)
    10 to 90% (Non-condensing)
    10 to 90% (Non-condensing)
    Connector to Plug-in Card or PC (Data)
    n/a
    USB-B
    USB-B
    USB Communication
    n/a
    USB 1.1
    USB 1.1
    USB Power Consumption
    n/a
    < 200 mA
    < 200 mA
    RF Input Connector
    n/a
    N-type Precision
    N-type Precision

    Electrical Specifications

    Model
    7002-003 (Sensor)7002-005 (Sensor)
    Detector Type
    Diode
    Diode
    Measurement FunctionPeak PowerPeak Power
    Calibrated Frequency Range
    9 kHz to 6 GHz80 MHz to 18 GHz
    Power Measuring Range
    -55 dBm to +10 dBm
    -45 dBm to +10 dBm
    Input Damage Level
    >20 dBm
    >20 dBm
    Resolution
    0.01 dB
    0.01 dB
    VSWR
    <1.05 @ 10 MHz to 100 MHz
    <1.15 @ 100 MHz to 2 GHz
    <1.35 @ 2 GHz to 6 GHz
    <1.20 @ 80 MHz to 10 GHz
    <1.35 @ 10 GHz to 18 GHz
    Maximum Linearity Error (0 dBm ref)
    0.05 dB/10 dB
    0.05 dB/10 dB
    Measuring Speed (Per Second)
    1 MSps (10 MSps for CW)
    100 kSps or 20 kSs (Software Selectable)
    1 MSps (10 MSps for CW)
    100 kSps or 20 kSs (Software Selectable)
    Logging Buffer Record Mode
    4,000 Samples
    2,000 Pre-trigger
    2,000 Post-trigger
    4,000 Samples
    2,000 Pre-trigger
    2,000 Post-trigger
    Accuracy (23 2 C)
    0.25 dB
    0.25 dB (10 GHz)
    0.50 dB (>10 GHz)
    Temperature Effect
    <0.15 dB Over Full Temperature Range
    <0.15 dB Over Full Temperature Range
    Measurement Units
    dBm
    dBm

    Product Configuration

    • EMPower RF Power Pulse Sensor (Please Specify Model)
    • 2 m Shielded USB Cable
    • Installation CD