Key Product Information


Magnet Friendly

The GDP system does not generate RF noise, ensuring non-interference with the magnet and other sensitive medical equipment.

Wall Installation

Med-Vizion light panels are easily installed with hand tools. When electrical service is provided, a single light panel can be installed on a wall in less than an hour. This allows exam and MRI rooms to receive a visual makeover with little or no downtime or loss of patient throughput.
Standard light panels have a depth of only a nominal 25 mm (1 in) and can often be mounted to existing wall surfaces. Special diffraction technology allows illumination from edge-mounted LEDs to be dispersed evenly and naturally, as if the light source were originating from a point behind the panel.
Changing the wall mounted light panel’s transparency is also easy. The specially designed hinged frames allow transparencies to be changed in minutes without tools.

Ceiling Installation

Light panels are easily installed in existing suspended grid ceiling with typical sizes of 0.6 m x 0.6 m (2 ft x 2 ft) or 0.6 m x 1.2 m (2 ft x 4 ft). Custom sizes and shapes (circular, oval, etc.) can be accommodated with framing kits.

Long Life, Low Energy Consumption

The long life and low energy features of our GDP system are the result of a high quality LED light source. Rated for 50,000 hours of operation, the light source has very low energy consumption and very little heat displacement. Maintenance is minimal.

Large Image Gallery

A large number of original images, both photographs and artist renderings, are available for a number of subject areas; desert scenes, oceanscapes, gardens, mountains and lakes, etc. Each image is created in high definition to provide the most realistic viewing.

Specifications Select a tab below for more information



Model
Input Voltage​Power Consumption​
Input Leads​Connector​Wiring
​Illuminated Panel
11.5 VDC​​0.25 W per LED (18 LEDs per 0.3 m (1 ft) of Illuminated Panel Edge)​​​
​0.812 mm (20 AWG) Two-wire Connector
​2.1 mm x 5.5 mm Barrel Connector​
​Multiple panels can be wired in parallel when connecting to a single power supply.

​​​​​

Model
Input Voltage​Maximum Load​Output Voltage Full Load​Input Lead​Thermal Class
​Dimmable LED DC Magnetic Transformer
​​Auto-ranging 120V 60 Hz - 220V 50 Hz​
​60 W, 100 W, 150 W
​11.5 VDC
​1.02 mm (18 AWG) Two-wire Connector​
​B; 130°C (266° F)


  • Image Transparency
  • Image Frame
  • Power Transformer
  • Images Frame Shapes
    • Square
    • Rectangular
    • Round
    • Oval
    • Bullet
    • Custom
  • Optional Dimmer Available

 

 

Automatic Opener/Closer For use with Auto-Seal II Door<p>ETS-Lindgren's Automatic Door Opener/Closer (AOC) provides easy access into the MRI with adjustable timing on the opening and closing operation.</p>
CCTV Intercom System ​ETS-Lindgren's CCTV Intercom System is a reliable and efficient method for constant contact between the MRI room and the control room.
EMI/RFI Shielded Waveguide Air Vents ​​​​ETS-Lindgren's Waveguide Air Vents are manufactured to meet a variety of customer requirements. 
Magnetic Active Compensation System (MACS/D™) for MRI ETS-Lindgren's wideband digital Magnetic Active Compensation System (MACS/D™) is a triaxial magnetic field compensator designed to significantly attenuate environmental magnetic fields affecting the image quality of supercon and resistive magnet MRIs and NMRs.
Med-Vizion Graphic Display Panel (GDP) System ​​ETS-Lindgren's Med-Vizion™ LED Graphic Panel MRI Lighting System (Wall) is an advanced lighting technology designed for MRI suite applications.
Med-Vizion LED Down Light ZXR-3500 and ZXR-4000 ​ETS-Lindgren's Med-Vizion™ ZXR Down Light is the latest in lighting technology specially designed for MRI suite applications. It produces the equivalent of a 175 watt incandescent light using only 32 watts of power.
Med-Vizion™ MRI Lighting LED Sheet Lamp Recessed Troffer LFP2x2-40KETS-Lindgren's Med-Vizion™ LFP2x2-40K is a an excellent lighting solution for MRI rooms and other similar applications.
Med-Vizion™ MRI Lighting LED Sheet Lamp Recessed Troffer LFP2x4-40K <p>ETS-Lindgren's Med-Vizion™ Model LFP2x4-40K is a an excellent lighting solution for MRI rooms and other similar applications. </p>
Medical RF Filters ​ETS-Lindgren's Medical RF Filters enable electrical power, lighting and data signals to be brought into the MRI room, through the RF shield. All RF filters are typically located in one area, usually near the penetration panel of the MRI equipment.
OMS™ Sample Draw Oxygen Monitoring System ​​ETS-Lindgren’s Oxygen Monitoring System (OMS) is a sample draw monitoring system that alerts and alarms when oxygen levels fall below safe limits for human health.
SAFESCAN® Ferromagnetic Target Scanner™ ETS-Lindgren's SAFESCAN® Target Scanners are specifically designed for MR safety, and alarm only on detection of ferromagnetic threats.
Safe IV Port for Medical Applications <span class="ms-rteThemeFontFace-1"></span>ETS-Lindgren's Safe IV Port (SIVP) is a cylindrical waveguide that provides safe and easy passage of intravenous (IV) lines into an MRI room, without compromising the RF shield.
SafeScan® Ferromagnetic Detection Systems ETS-Lindgren's SAFESCAN® Single and Dual Pillar Systems offer continuous 'walk by' ferromagnetic detection for hallways or doorways.

Key Features


  • Magnet Friendly
  • Easy Installation
  • Long Life, Low Energy Consumption
  • Large Image Gallery
  • Three-Year Warranty

Literature and Videos


 

 

http://www.ets-lindgren.com/products/shielding/medical-shielding/medical-shielding-accessories/11008/1100805<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/MRI%20Lighting%20Brochure.pdf">MRI Lighting Brochure.pdf</a>

 

 

http://www.ets-lindgren.com/products/shielding/medical-shielding/medical-shielding-accessories/11008/1100805

L o a d i n g

 Catalog-Item Reuse