​ETS-Lindgren has extended its range of EMPower RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11™, Bluetooth® and Zigbee™. The model 7002-006 provides measurements over a frequency range from 10 MHz up to 6 GHz. 

To achieve the measurement requirements of the standards, the sampling speed of the EMPower Pulse power heads has been increased to a maximum of 5 MS/s. A hardware trigger input/output has also been added to allow synchronous power measurements of wideband data transmission devices with multiple inputs/outputs (MIMO).

The EMPower is equipped with an USB interface which enables direct connection of the Power heads to a PC USB port.

The 7002-006 offers a burst mode, compliant with the measurement methods as defined in the ETSI standards for wideband data transmission systems EN 300 328 (2.4 GHz) and EN 301 893 (5 GHz).

In burst mode, the EMPower can store the information of 100.000 bursts and observation time up to 60 seconds. For each burst the average power and timing data is stored in the buffer. The 7002-006 uses a sample speed of 1 or 5 MSps in combination with a RMS detector to ensure correct measurements on wideband modulating transceivers.

For MIMO devices multiple 7002-006 power meters units can be daisy-chained using the MMCX connectors enabling synchronized triggering of the EMPower Meters.

Key Product Information

Specifications Select a tab below for more information

7002-006 Plug-in Card Features
​Detector Type
​​​RMS Log Detector
​Measurement Function
​​​RMS CW Power, Peak (Max Hold) and Burst Mode​
Calibrated Frequency Range
​​10 MHz to 6 GHz​
​​Power Measuring Range
​​-50 dBm to +10 dBm
​​Maximum SWR​
​1.05 @ Below 1 GHz
1.15 @ 1 GHz to 6 GHz​
​Frequency Response Accuracy (at 23° C ± 2° C)​
​±0.25 dB​
​Deviation from CW for Wideband Modulated Signals wtih High Crest Factor
​​0.25 dB
​​Linearity Error​
​0.05 dB + 0.005 dB/dB
​​Input Damage Level
​> +20dB
​0.01 dB
​​RF Input Impedance
​​50 Ω​
​Measuring Speed
​​Max. 5 MS/s​
​Temperature Effect
​​0.15 dB Over Full Temperature Range
​​Zero Adjustment​
​Not Required
​​Frequency Response Correction​
​Stored Frequency Response Data is Taken into Account by Numerical Entry of the Measurement Frequency
​​Measurement Units

  • ​Interchangeable EUT Power Adapters: NEMA, Schuko, British or Australian Adapters Available

View BIM Models of our Product Options Below:



Key Features

  • Fully Compliant with ETSI 300 328 and 301 893
  • Fast, Accurate Performance
  • Easy Operation
  • Burst Mode

Literature and Videos

Date Last Updated: Friday, January 17, 2020
L o a d i n g

 Catalog-Item Reuse