EMPower Power Meters Model 7002-006
Product Image

ETS-Lindgren has extended its range of EMPower RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11, Bluetooth and Zigbee.

Key Features
  • Fully Compliant with ETSI 300 328 and 301 893
  • Fast, Accurate Performance
  • Easy Operation
  • Burst Mode

ETS-Lindgren has extended its range of EMPower RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11, Bluetooth and Zigbee. The model 7002-006 provides measurements over a frequency range from 10 MHz up to 6 GHz.

To achieve the measurement requirements of the standards, the sampling speed of the EMPower Pulse power heads has been increased to a maximum of 5 MS/s. A hardware trigger input/output has also been added to allow synchronous power measurements of wideband data transmission devices with multiple inputs/outputs (MIMO).

The EMPower is equipped with an USB interface which enables direct connection of the Power heads to a PC USB port.

The 7002-006 offers a burst mode, compliant with the measurement methods as defined in the ETSI standards for wideband data transmission systems EN 300 328 (2.4 GHz) and EN 301 893 (5 GHz).

In burst mode, the EMPower can store the information of 100.000 bursts and observation time up to 60 seconds. For each burst the average power and timing data is stored in the buffer. The 7002-006 uses a sample speed of 1 or 5 MSps in combination with a RMS detector to ensure correct measurements on wideband modulating transceivers.

For MIMO devices multiple 7002-006 power meters units can be daisy-chained using the MMCX connectors enabling synchronized triggering of the EMPower Meters.

Specifications
View the EMPower Power Meters Model 7002-006 technical specifications below

Physical Specifications

Model
7002-006 Plug-in Card Features
Detector Type
RMS Log Detector
Measurement Function
RMS CW Power, Peak (Max Hold) and Burst Mode
Calibrated Frequency Range
10 MHz to 6 GHz
Power Measuring Range
-50 dBm to +10 dBm
Maximum SWR
1.05 @ Below 1 GHz
1.15 @ 1 GHz to 6 GHz
Frequency Response Accuracy (at 23 C 2 C)
0.25 dB
Deviation from CW for Wideband Modulated Signals wtih High Crest Factor
0.25 dB
Linearity Error
0.05 dB + 0.005 dB/dB
Input Damage Level
> +20dB
Resolution
0.01 dB
RF Input Impedance
50
Measuring Speed
Max. 5 MS/s
Temperature Effect
0.15 dB Over Full Temperature Range
Zero Adjustment
Not Required
Frequency Response Correction
Stored Frequency Response Data is Taken into Account by Numerical Entry of the Measurement Frequency
Measurement Units
dBm/Watt

Electrical Specifications


Product Options

  • Interchangeable EUT Power Adapters: NEMA, Schuko, British or Australian Adapters Available
Request a QuoteView Manual

Literature and Videos