Key Product Information


Precision Designed and Manufactured

All model 2181 have turntable tops that ​are precision machined using CNC milling equipment for a smooth, even platform that is warp resistant. The nominal tolerance for flatness is .32 cm (.13 in) over 2 m​​. Run out tolerances are less than or equal to .16 cm (0.06 in). All model 2181 Turntables feature a durable bronze filament ground brush and matching wear strip to provide continuous electrical coupling with the ground plane. 

Operation

These turntables also include the ability to set mechanical limits for clockwise and counterclockwise rotation, using manually movable pins. Within the mechanical limits, soft limits can be set using the EMCenter™ with EMControl™ plug-in card. The turntables can also be set for continuous rotation. Optional slip rings for EUT power signal lines are recommended if continuous rotation is performed.

Fiber Optic Lines

Signal I/O between the motor base and ETS-Lindgren's Positioning Controller is fiber optic, eliminating a potential source of RF interference. The turntable includes 10 m of fiber optic cable.

Specifications Select a tab below for more information



  • 208-230 VAC Single Phase 50/60Hz 20A
Model
Distributed Rating1
​2181-2.0
2,500 kg​ (5,511 lb)
​2181-3.0
​4,000 kg (8,818 lb)
​2181-4.0
​6,000 kg (13,228 lb)
​2181-5.0
​6,800 kg (14,991 lb)
​2181-6.0
​9,000 kg (19,842 lb)

1Distributed Load Rating: Applies when load is evenly distributed to each wedge section; no point loads under .37 sq m (4 sq ft) should exceed 500 kg (1,100 lb), and not over 500 kg should be applied to a 45° segment outboard of the casters. Dimensions are not for construction purposes. Consult factory for physical and electrical installation requirements.
  • Turntable Assembly
  • Variable Speed
  • Ground Brush and Wear Strip
  • 10 m Fiber Optic Cable
  • Installation Supervisor Included (USA Only)

  • LISNs
  • Slip Rings for Electrical and Signal Connections
  • IR Hand Control Unit (Requires Optional IR Repeater)
  • EUT Power Outlets (Flush Mounted on Tabletop)
  • Control Unit (Sold Separately): EMCenter™ with EMControl™

 

 

1062-1.2 Turntables ​ETS-Lindgren's Model 1062-1.2B is a low profile, manually operated, nonmetallic turntable designed for pre-scan measurements.
2165 Turntable ​ETS-Lindgren's Model 2165 LoPro<font size="2">™</font> Turntable is ideal for today's EMC test applications where height is a concern and installation options may be limited.
2181 Turntable ​​ETS-Lindgren's Series 2181 Turntables have a long legacy of durability and trouble free operation.
2187 Turntable ​​ETS-Lindgren's Series 2187 Turntables are designed for applications requiring a mid-sized turntable with reasonable weight load requirements.<br>
2188 Turntable ​​ETS-Lindgren Series 2188 Turntables are ideal for today’s EMC test applications where height is a concern and installation options may be limited.​

Key Features


  • Aluminum Construction
  • Extra-heavy Duty Drive Train
  • Variable Speed 
  • Standard 2.0 m (6.56 ft) to 6.0 m (16.69 ft) Diameter 
  • Ground Brush and Floor Flange 
  • Fiber Optic Control Lines 
  • 208-230VAC Single Phase input power
  • 2500 kg (5,511 lb) to 9000 kg (19,841 lb) Distributed Rating1

1
Distributed Load Rating: Applies when load is evenly distributed to each wedge section; no point loads under .37 sq m (4 sq ft) should exceed 500 kg (1,100 lb), and not over 500 kg should be applied to a 45° segment outboard of the casters. Dimensions are not for construction purposes. Consult factory for physical and electrical installation requirements.

Literature and Videos


 

 

http://www.ets-lindgren.com/products/positioners/turntables/8006/800603<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/positioners/turntables/8006/800603

L o a d i n g

 Catalog-Item Reuse