Product Image

Key Features

  • Aluminum Construction
  • Extra-heavy Duty Drive Train
  • Variable Speed
  • Standard 2.0 m (6.56 ft) to 6.0 m (19.7 ft) Diameter
  • Ground Brush and Floor Flange
  • Fiber Optic Control Lines
  • 208-230VAC Single Phase input power
  • 2500 kg (5,511 lb) to 9000 kg (19,841 lb) Distributed Rating1

1
Distributed Load Rating: Applies when load is evenly distributed to each wedge section; no point loads under .37 sq m (4 sq ft) should exceed 500 kg (1,100 lb), and not over 500 kg should be applied to a 45 segment outboard of the casters. Dimensions are not for construction purposes. Consult factory for physical and electrical installation requirements.
  • Download PDF Datasheet
  • ETS-Lindgren's Series 2181 Turntables have a long legacy of durability and trouble free operation. These turntables have been installed both indoors and outdoors at test sites around the world and have set the standard for others to follow. Available in a variety of standard diameters, weight loadings and drive speeds, these turntables can also be customized to meet your exact requirements.

    Specifications
    View the 2181 Turntable technical specifications below

    Physical Specifications

    Model
    Distributed Rating1
    2181-2.0
    2,500 kg (5,511 lb)
    2181-3.0
    4,000 kg (8,818 lb)
    2181-4.0
    6,000 kg (13,228 lb)
    2181-5.0
    6,800 kg (14,991 lb)
    2181-6.0
    9,000 kg (19,842 lb)

    1Distributed Load Rating: Applies when load is evenly distributed to each wedge section; no point loads under .37 sq m (4 sq ft) should exceed 500 kg (1,100 lb), and not over 500 kg should be applied to a 45 segment outboard of the casters. Dimensions are not for construction purposes. Consult factory for physical and electrical installation requirements.

    Electrical Specifications

    • 208-230 VAC Single Phase 50/60Hz 20A

    Product Options

    • LISNs
    • Slip Rings for Electrical and Signal Connections
    • IR Hand Control Unit (Requires Optional IR Repeater)
    • EUT Power Outlets (Flush Mounted on Tabletop)
    • Control Unit (Sold Separately): EMCenter with EMControl

    Product Configuration

    • Turntable Assembly
    • Variable Speed
    • Ground Brush and Wear Strip
    • 10 m Fiber Optic Cable
    • Installation Supervisor Included (USA Only)