Key Product Information


Low Profile

With a top almost flush to the ground plane, excavating a pit to bury a power train assembly is not necessary. The LoPro can be used indoor or outdoor (if the turntable is properly protected from rain, moisture, etc.) sites where traditional turntables are impractical or impossible to install. In chambers, antenna scan height is maximized as space robbing subfloors are not required. 

The LoPro's minimal height and ABS/PVC construction is virtually RF invisible, so site attenuation characteristics are virtually unchanged.

Flexible Design

The LoPro is portable for maximum utility. The unit can be easily disassembled within a few minutes. For more permanent installations, mounting holes for anchor bolts are provided on the base. The unit's toothed-belt drive ensures non-slip rotation for greater positioning accuracy.

Fiber Optic Control Lines

Signal I/O between the motor base and optional controller is fiber optic, eliminating a potential source of RF interference. The turntable includes 10 meter of fiber optic cable. Additional lengths of cable are available. 

Specifications Select a tab below for more information



Max RPM: 2.5 
Phase: Single 
Voltage: 208/230 VAC
Control Unit (Sold Separately): EMCenter with EMControl
Nominal Load Capacity:  272 kg (600 lb) 
Nominal Max Diameter: 1.2 m (3.94 ft) 
Nominal Turntable Platform Height: 5 cm (1.97 in) 
Top Construction: One-piece PVC with ABS Surface
  • ​Control Unit (Sold Separately): EMCenter with EMControl

 

 

1062-1.2 Turntables ​ETS-Lindgren's Model 1062-1.2B is a low profile, manually operated, nonmetallic turntable designed for pre-scan measurements.
2165 Turntable ​ETS-Lindgren's Model 2165 LoPro<font size="2">™</font> Turntable is ideal for today's EMC test applications where height is a concern and installation options may be limited.
2181 Turntable ​​ETS-Lindgren's Series 2181 Turntables have a long legacy of durability and trouble free operation.
2187 Turntable ​​ETS-Lindgren's Series 2187 Turntables are designed for applications requiring a mid-sized turntable with reasonable weight load requirements.<br>
2188 Turntable ​​ETS-Lindgren Series 2188 Turntables are ideal for today’s EMC test applications where height is a concern and installation options may be limited.​

Key Features


  • Fiber Optic Control Lines Eliminate RF noise 
  • Variable Speed Motor 
  • Ultra-low Profile, 5 cm (1.97 in) High Turntable Platform

Literature and Videos


 

 

http://www.ets-lindgren.com/products/positioners/turntables/8006/800602<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/positioners/turntables/8006/800602

L o a d i n g

 Catalog-Item Reuse