Key Product Information


Objects can be rotated independently, in either/both theta and phi axes. Objects in the phi axis can be rotated in a continuous 360 degrees clockwise/ counterclockwise direction, at variable speeds, under program control using the optional positioning controller. Objects in the theta axis can be rotated 360 degrees (non-continuous) with an optional positioning controller.



The model 2120CR is constructed with low reflective dielectric materials to minimize RF obstruction or distortion, and was designed to minimize EMI noise and offer minimal physical obstruction to RF fields. Motor units contained in RF-shielded enclosures and are designed to be placed below the absorber. Signal lines from motor to the optional positioning controller are fiber optic. 

Specifications Select a tab below for more information

Phase: Single 
Power: 208/230 VAC; <10 A 50/60 Hz
Maximum Height: Consult Factory 
Minimum Height: Consult Factory 
Nominal Height: Consult Factory 
Test Object Load Rating: 34.0 kg (75.0 lb)
  • MAPS Assembly Including Heavy Duty Mast Capable of Handling up to 34.0 kg (75.0 lb) EUT
  • SAM Phantom Head and Shoulders
  • Standard Heights Available (Please Specify One):
    • 152.4 cm (60.0 in) (2120CR-6000)
    • 172.7 cm (68.0 in) (2120CR-6800)
    • 182.9 cm (72.0 in) (2120CR-7200)
    • 213.4 cm (84.0 in) (2120CR-8400)
  • Fiber Optic Cable Assembly
  • Bulkhead Feed-through
  • Two-year Warranty
  • Manual
  • EMQuest™ EMQ-100 Integrated Automated Test and Measurement Software (Optional)
  • Control Unit (Sold Separately): EMCenter™ with EMControl™



2110CR Multi-Axis Positioner (MAPS)​​​​​​ETS-Lindgren's Model 2110CR Light Duty Multi-Axis Positioning System (MAPS) is designed to perform measurements of spherical antenna patterns plus total and effective isotropic radiated power of wireless hand-held devices.
2115CR Multi-Axis Positioning Systems (MAPS)ETS-Lindgren's Model 2115CR Medium Duty Multi-Axis Positioner is designed to provide smooth rotation of a test object in both theta and phi axes.
2120CR Multi-Axis Positioner (MAPS)ETS-Lindgren's Model 2120CR Heavy Duty Multi-Axis Positioning System (MAPS) is designed to provide smooth rotation of a test object in both theta and phi axes.

Key Features

  • 360° Independent Rotation in Both Theta and Phi Axes, Continuous Rotation in Phi Axis
  • Angular Positioner Accuracy Better than ± -0.5°
  • Variable Speed Axis Rotation
  • Convenience Outlet and Coaxial Rotary Joint Installed at Turntable Center
  • Suitable for RSE Testing
  • Testing With/Without SAM Phantom Head (Optional)
  • EMCenter Positioning Controller (Required):
    • IEEE-488-2 (GPIB) Compatible
    • Fiber Optic Control Lines
  • EMQuest™ EMQ-100 Integrated Automated Test and Measurement Software (Optional)

Literature and Videos<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

L o a d i n g

 Catalog-Item Reuse