5247 Shielded Test Cell Enclosure
ETS-Lindgren's Model 5247 Shielded RF Test Enclosure is a self-contained portable enclosure for making wireless device over the-air performance measurements.

 

 


ETS-Lindgren's Model 5247 Shielded RF Test Enclosure is a self-contained portable enclosure for making wireless device over the-air performance measurements. The model 5247 is constructed with the same RF shielding and shielded door technology used in the construction of our larger, full certification wireless test chambers. The RF shielded door uses compressible finger stock in a “knife edge” configuration. Two latch points with a single point handle provide secure sealing and one-hand operation. Typical RF isolation of both the shielding and door is greater than 80 dB.

Key Product Information


​Anechoic Absorber

The RF anechoic absorber used in the model 5247 is performance optimized for the frequencies of interest. The absorber limits reflections and moding, contributing to more accurate, repeatable measurements. Tapered wedges line the walls, pyramidal absorber is used on the floor, and lossy foam lines the antenna.

Dual Polarized Horn Antenna

The model 5247 is equipped with an ETS-Lindgren dual polarized horn antenna. The standard included antenna can make both linear and circular measurements over the frequency range of 700 MHz to 6 GHz. (Optional hybrid required for circular measurements.) Typical frequency response is flat from 2 GHz through 6 GHz. The antenna is mounted on quick-change removable access panel at the top or “ceiling” of the enclosure. The antenna can be quickly interchanged with another antenna of a different frequency, etc., as needed.

​Connector, Antenna and Access Panels

A populated connector panel (bulkhead feed through) is included with the model 5247. The panel includes; one SMA connector, three Type N connectors, one filtered D-sub 25-pin connector, a six-line fiber optic feed-through, and one ground stud. A USB fiber optic media converter with a two-port hub (requires 110/220 VAC/5A supplied) is optional. A quick-change antenna mounting panel (with a pre-mounted antenna) is included.

Applications

Typical applications for the model 5247 include radiated power (TX) and sensitivity (RX) measurements made during design verification, pre-certification, and in-line testing functions.

Specifications Select a tab below for more information



Antenna Connections:  SMA Female (2) 
Cross Polarization Isolation: >20 dB 
Frequency Range:  700 MHz to 10 GHz 
Nominal Impedance: 50 Ω
Nominal Width (External): 74.9 cm (29.5 in)
Nominal Depth (External): 86.3 cm (34.0 in) 
Nominal Height (External): 203.7 cm (80.2 in) 
Nominal Width (Internal): 33.8 cm (13.3 in) 
Nominal Depth (Internal): 33.8 cm (13.3 in) 
Nominal Height (Internal): 112.0 cm (44.2 ​​​​in) 
Nominal Weight: 231.3 kg (509.9 lb)
  • Enclosure with RF Anechoic Lining, RF Shielded Door, Connector Panel with Connectors/Filters, DUT Access Panel, Antenna Panel and Casters
  • One Dual Polarized Measurement Antenna
  • USB Fiber Optic Media Converter
  • Additional Antennas can be Purchased to increase/Decrease Frequency Range
  • Additional Feedthrough Connector & Filter Options
  • Instrumentation and EMQuest™ Test Automation Software
  • Training

 

 

SMART 1000 Mini-Reverb Cell http://www.ets-lindgren.com/products/chambers/emc-chambers/smart™-reverb-chambers/14000/1400005SMART 1000 Mini-Reverb Cell
5201 Tabletop RF Test Enclosure http://www.ets-lindgren.com/products/test-enclosures/14000/14000065201 Tabletop RF Test Enclosure
5230 Table Top Test Enclosure http://www.ets-lindgren.com/products/test-enclosures/14000/14000015230 Table Top Test Enclosure
5240 Table Top Test Enclosures http://www.ets-lindgren.com/products/test-enclosures/14000/14000025240 Table Top Test Enclosures
5225-2 Access Point Test Enclosure http://www.ets-lindgren.com/products/test-enclosures/14000/14000045225-2 Access Point Test Enclosure
5247 Shielded Test Cell Enclosure http://www.ets-lindgren.com/products/test-enclosures/14000/14000085247 Shielded Test Cell Enclosure
5211 Wireless Interface Test System http://www.ets-lindgren.com/products/test-enclosures/14000/14000075211 Wireless Interface Test System

Key Features


  • Roll-About Casters Portable RF Shielded Enclosure for OTA measurements 
  • >80 dB Typical RF Isolation 
  • RF Absorber Lined 
  • Dual Polarized Horn Antenna

Literature and Videos


 

 

http://www.ets-lindgren.com/products/test-enclosures/14000/1400008<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/test-enclosures/14000/1400008

L o a d i n g

 Catalog-Item Reuse