Key Product Information


​Maximum Protection

N242X filters have an extremely low current leakage. They are fully tested for attenuation performance, voltage withstanding to 1 kV for thirty seconds, and insulation resistance.

Insertion Loss

The N242X series of filters provide 100 dB insertion loss from 150 kHz to 40 GHz in both symmetric and asymmetric modes up to full load.

Mobile Installations

These filters are suitable for mobile installation applications.

End Chamber Accessibility

For termination of input and output cabling, these filters have fully accessible end chambers.

RoHS Compliant, CE Marked

N242X filters are RoHS compliant and are also CE marked for compliance with the low voltage directive.

Applications

  • Military Field Installations

  • Commercial Installations Using Motor Generator Sets

  • Filtering of Mains Supplies Where Maximum Safety is Required N242X Series Power Filters Series

  • Under certain circumstances, the N242X Filters may be used with Earth leakage safety cut-outs. Please contact ETS-Lindgren for further information.

Specifications Select a tab below for more information



Part # Current (Max) Leakage Current Per Volt (N-E) Voltage Max # of Lines Voltage Drop on Full Load in 250V 50/60/Hz System/Line DC Resistance Per Line Series Inudct Per Line Shunt Capac. Per Line Case Temp Rise On Full Load Max. Recom. Case Temp on Full Load Full Load Dissipation
N2420 6 A 2 mA 250 V21 V 0.1 Ω 1,680 uF4.5 uH +10 °C +70 °C20 W
N2421 6 A 2 mA 440/250 V 4 1 V 0.1 Ω1,680 uF 4.5 uH +10 °C+70 °C40 W
N2422 32 A 8 mA 250 V20.4 V 0.015 Ω 177 uF24.5 uH+12 °C+70 °C 100 W
N2423 32 A 8 mA 440/250 V 4 0.4 V 0.015 Ω177 uF 24.5 uH+12 °C+70 °C200 W
N2424 63 A 8 mA 250 V 20.3 V 0.03 Ω25.5 uF24.5 uH+12 °C +70 °C60 W
N2425 63 A 8 mA440/250 V 4 0.3 V 0.03 Ω25.5 uF24.5 uH+12 °C+70 °C120 W
N2426100 A10 mA250 V2 0.5 V0.02 Ω37 uF 28.5 uH +25 °C+70 °C120 W
N2427 100 A 10 mA440/250 V40.5 V 0.02 Ω 37 uF 28.5 uH +25 °C +70 °C 240 W

Part # A B C D E F G H J K L M N Weight
N2420 305 mm (12 in)
175 mm (6.9 in)
110 mm (4.3 in)
212 mm (8.3 in)
50 mm (2 in)
63.5 mm (2.5 in)
46.5 mm (1.8 in)
46.5 mm (1.8 in)
24 mm (.9 in)
127 mm (5 in)
20 mm (.8 in)
7 mm (.3 in)
M6 5.9 kg (13 lb)
N2421 305 mm (12 in)
345 mm (13.5 in)
110 mm (4.3 in)
212 mm (8.3 in)
50 mm (2 in)
108 mm (4.3 in)
46.6 mm (1.8 in)
46.5 mm (1.8 in)
64.5 mm (2.5 in) 216 mm (5 in) 20 mm (.8 in)
9 mm (.4 in) M6 11.8 kg (26 lb)
N2422 560 mm (22 in)
210 mm (8.3 in)
110 mm (4.3 in)
487 mm (19.1 in)
50 mm (2 in)
41.2 mm (1.6 in)
46 mm (1.8 in) 35 mm (1.4 in)
63.8 mm (2.5 in) 82.4 mm (3.2 in)
32 mm (1.3 in)
9 mm (.4 in) M6 12.7 kg (28 lb)
N2423 560 mm (22 in)
415 mm (16.3 in)
110 mm (4.3 in)
487 mm (19.1 in)
50 mm (2 in) 143 mm (5.6 in) 46 mm (1.8 in)
35 mm (1.4 in)
64.5 mm (2.5 in)
286 mm (11.3 in)
32 mm (1.3 in)
13 mm (.5 in)
M6 24.9 kg (54.9 lb)
N2424 560 mm (22 in)
210 mm (8.3 in)
110 mm (4.3 in)
487 mm (19.1 in)
50 mm (2 in)
41.2 mm (1.6 in)
46 mm (1.8 in)
35 mm (1.4 in) 63.8 mm (2.5 in) 82.4 mm (3.2 in) 32 mm (1.3 in) 9 mm (.4 in) M6 12.7 kg (28 lb)
N2425 560 mm (22 in)
415 mm (16.3 in) 110 mm (4.3 in) 487 mm (19.1 in) 50 mm (2 in)
143 mm (5.6 in)
46 mm (1.8 in) 35 mm (1.4 in) 64.5 mm (2.5 in)
286 mm (11.3 in)
32 mm (1.3 in)
13 mm (.5 in) M6 24.9 kg (54.9 lb)
N2426 560 mm (22 in)
210 mm (8.3 in)
110 mm (4.3 in) 487 mm (19.1 in) 50 mm (2 in) 41.2 mm (1.6 in) 46 mm (1.8 in) 35 mm (1.4 in) 63.8 mm (2.5 in)
82.4 mm (3.2 in) 32 mm (1.3 in)
9 mm (.4 in)
M6 17.7 kg (39.0 lb)
N2427 560 mm (22 in)
415 mm (16.3 in) 110 mm (4.3 in)
487 mm (19.1 in)
50 mm (2 in)
143 mm (5.6 in)
46 mm (1.8 in)
35 mm (1.4 in)
64.5 mm (2.5 in)
286 mm (11.3 in) 50.8 mm (2 in)
13 mm (.5 in)
M6 34 kg (75 lb)

 

  • ​Filter Networks are RF Sealed in High Quality Electroplated Steel Cases
  • Available with a Variety of Cable Entry Options
  • Fixing Kit 
  • ​TS (Transient Suppressor) to Give Total Protection Against all Normal Mains-borne Interference
  • HVTS (High Voltage Transient Suppressor)
  • Other Options Upon Request

 

 

N242X Series Low Earth Leakage High Performance RFI/EMI Power Filters<p>ETS-Lindgren's Model N242X Power Filters are low leakage RFI/EMI high-performance power filters, designed for use where low earth leakage is a requirement. <br></p>
N258X High Current RFI/EMP Power Filters <p>​ETS-Lindgren's N258X High Current RFI/EMP Power Filters are designed for use on main incoming three phase and neutral supplies, carrying up to 800 Amps and 400 Amps respectively, and are ideal for use in EMPP systems and other applications. </p>
N900X Series Power Filters<p>​ETS-Lindgren’s N900x Power Filters are high performance EMI power filters for use in EMC and Data Center/IT applications as well as any other installation which requires maximum protection from incoming mains interference.</p>

Key Features


  • Suitable for Mobile Installations
  • Over 100 dB Insertion Loss from 150 kHz to 10 GHz
  • Fully Accessible End Chambers
  • RoHS Compliant and CE Marked for Compliance with the Low Voltage Directive
  • Amp Range: 6 Amps to 100 Amps
  • Frequency Range: 2 Line Filters, 250V-DC/50/60Hz
  • 4 Line Filters, 440/250V-DC/50/60H

Literature and Videos


 

 

http://www.ets-lindgren.com/products/filters/6004/600405<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/filters/6004/600405

L o a d i n g

 Catalog-Item Reuse