Key Product Information


Specifications Select a tab below for more information



Power Handling: 200.0 W/in2 GHz

Frequency Range by Model
ModelFrequency MinimumFrequency Maximum
HP-3PCL4 GHz40 GHz
HP-5PCL2 GHz40 GHz
HP-8PCL1 GHz40 GHz
HP-12PCL1 GHz40 GHz
HP-18PCL500 MHz40 GHz
HP-24PCL200 MHz40 GHz

Dimensions by Model
ModelOverall HeightBase HeightPyramid HeightNominal WeightPyramids Per Absorber
HP-3PCL8.25 cm   (3.25 in)1.9 cm   (0.75 in)6.4 cm   (2.52 in)1 kg   ( 2.20 lb )256
HP-5PCL12.7 cm   (5.00 in)2.5 cm   (0.98 in)10.2 cm   (4.02 in)1.6 kg   ( 3.53 lb )144
HP-8PCL26.1 cm   (10.28 in)5.1 cm   (2.01 in)16.5 cm   (6.50 in)2.8 kg   ( 6.17 lb )64
HP-12PCL31.1 cm   (12.24 in)5.7 cm   (2.24 in)25.4 cm   (10.00 in)3.8 kg   ( 8.38 lb )36
HP-18PCL46.4 cm   (18.27 in)5.7 cm   (2.24 in)40.6 cm   (15.98 in)4.6 kg   ( 10.14 lb )16
HP-24PCL61 cm   (24.02 in)10.2 cm   (4.02 in)50.8 cm   (20.00 in)6.1 kg   ( 13.45 lb )9


 

 

Wedge Absorber ​ETS-Lindgren's Wedge Absorber effectively reduces reflections between 30 MHz and 100 GHz and its RF reflectivity levels are the same as its equivalent sized pyramid absorber. Wedge absorbers are used in areas of chambers where pyramid absorbers would provide too much backscatter under specific configurations.<br>
CRV Curvilinear Microwave Absorber <p>​ETS-Lindgren Curvilinear Absorber is an advanced new RF absorber product that is optimized for broadband reflection suppression. </p>
EHP High Performance Microwave Pyramidal Absorber <p>​ETS-Lindgren's type EHP (Extra High Performance) microwave absorber is designed for use over a wide frequency spectrum and has been used as an effective tool for the reduction of reflections from 30 MHz through 100 GHz. </p>
FF Filter Foam Absorber <p>​ETS-Lindgren's Filter Foam/Vent Absorber series microwave absorber is similar in appearance and geometry to conventional ETS-Lindgren pyramidal and wedge type materials, and is tested to the same rigid specifications. </p>
Flat Laminate Absorber <p>​ETS-Lindgren's Flat Laminate Absorber, a moderate performance broadband microwave absorber is a graded dielectric material that has been widely accepted in the microwave and antenna fields. </p>
HP High Power Microwave Absorber <p>​ETS-Lindgren High Power Microwave Absorber is fabricated from high temperature materials. </p>
Microwave Convoluted Absorber <p>​ETS-Lindgren’s EHP Convoluted Absorber is designed to provide good refectivity performance with low forward scattering characteristics at incident angles up to 60° from normal incidence at microwave and millimeter-wave frequency ranges. </p>
Walkway Absorber <p>​ETS-Lindgren's Extra High Performance Walkway Absorber is a special absorbent material that is compatible with anechoic chamber reflection requirements, yet provides a walking surface for personnel. </p>

Key Features


  • Extremely Low Flammability
  • 200 V/m Power Handling Capability
  • Fire Retardant
  • Numerically Optimized Design
  • Rapid "Pump-down" for High Vacuum Applications
  • Honeycomb Structure

Literature and Videos


 

 

http://www.ets-lindgren.com/products/absorber/rf-microwave-absorbers/rf-absorbers/1006/100603<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/absorber/rf-microwave-absorbers/rf-absorbers/1006/100603

L o a d i n g

 Catalog-Item Reuse