Dual Line Single Phase Filters (LRX Series) - ETS-Lindgren
Dual Line Single Phase Filters (LRX Series)
Product Image
Key Features
  • Part of Our LRX Series of Filters
  • Designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz Applications
  • Manufactured to the Most Current Version of UL-1283
  • In accordance with the Low Voltage Directive
  • LRX Power Line Filters meet the following standards:
    MIL-F-15733
    MIL-STD-220C
    UL 1283 
    IEC 60939
    LVD 

ETS-Lindgren's Dual Line Single Phase Filters are individual, stand-alone dual circuit filters from our LRX series of power line filters. ETS-Lindgren manufactures UL Listed power line filters in a variety of mechanical configurations to meet your requirements. The basic, general purpose filter is the LRX series.

The Dual Line Single Phase Filters are designed for wall-mounted installation. This dual circuit power line filter can be used on AC or DC power lines including two wire AC systems with both lines above ground or three wire AC systems where one of the conductors is at ground potential and grounded to the filter case.

The LRX series of power line filters are designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz applications. However, these filters can also be used for lower voltage ratings, such as 120/208 volts, with no adverse effect.

Specifications
Physical Specifications
Model Number
Case Height ("A")
Case Width ("B")
Case Depth ("C")
Approximate Weight
LRX-2005-S2
94.0 cm (37.0 in)
22.9 cm (9.0 in)
12.7 cm (5.0 in)27.2 kg (60.0 lb)
LRX-2010-S2
94.0 cm (37.0 in)
22.9 cm (9.0 in)
12.7 cm (5.0 in)
27.2 kg (60.0 lb)
LRX-2020-S2
94.0 cm (37.0 in)
22.9 cm (9.0 in)12.7 cm (5.0 in)
27.2 kg (60.0 lb)
LRX-2030-S2
94.0 cm (37.0 in)
22.9 cm (9.0 in)
12.7 cm (5.0 in)
27.2 kg (60.0 lb)
LRX-2050-S2
111.8 cm (44.0 in)
35.6 cm (14.0 in)
15.2 cm (6.0 in)
45.4 kg (100.0 lb)
LRX-2060-S2
111.8 cm (44.0 in)
35.6 cm (14.0 in)
15.2 cm (6.0 in)
45.4 kg (100.0 lb)
LRX-20751-S2111.8 cm (44.0 in)
35.6 cm (14.0 in)
15.2 cm (6.0 in)
45.4 kg (100.0 lb)
LRX-2100-S2111.8 cm (44.0 in)
35.6 cm (14.0 in)
15.2 cm (6.0 in)
45.4 kg (100.0 lb)

NOTE: For Installation on shield, filters can be ordered with penetration kit. Add "/PEN" to model numbers.

1 Non UL Listed

Electrical Specifications
Model Number
Current Rating
Stopband Insertion Loss
LRX-2005-S2
2 x 5 A
100 dB, 14 kHz to 40 GHz
LRX-2010-S2
2 x 10 A
100 dB, 14 kHz to 40 GHz
LRX-2020-S2
2 x 20 A
100 dB, 14 kHz to 40 GHz
LRX-2030-S2
2 x 30 A
100 dB, 14 kHz to 40 GHz
LRX-2050-S2
2 x 50 A
100 dB, 14 kHz to 40 GHz
LRX-2060-S2
2 x 60 A
100 dB, 14 kHz to 40 GHz
LRX-20751-S22 x 75 A
100 dB, 14 kHz to 40 GHz
LRX-2100-S22 x 100 A
100 dB, 14 kHz to 40 GHz

NOTE: For Installation on shield, filters can be ordered with penetration kit. Add "/PEN" to model numbers.

1 Non UL Listed

Product Options
  • Can be provided in custom sized cases to adapt to shielding computer racks
  • Cases can be fitted with electrical outlets
  • Custom sized panels for unique install requirements
  • Optional mounting hardware