Product Image

Key Features

  • Ultra Broadband Frequency Range 30 MHz to 18 GHz*
    • Better than -10dB Reflectivity 30 MHz to 100 MHz
    • Better than -20 dB Reflectivity 100 MHz to 300 MHz
    • Better than -30 dB Reflectivity 300 MHz to 18 GHz
  • 540 V/m Power Handling Capability
  • Numerically Optimized Curvilinear Wedge Design
  • Meeting ETSI Requirements for Absorber Return Loss
  • Per IEEE-STD-1128 Recommended Test Methods
  • FlexSorb option available
  • Download PDF Datasheet
  • ETS-Lindgren's FerroSorb FS-980 High Performance Hybrid Ferrite Tile Polyurethane Dielectric Absorber is the first commercially available absorber to meet the absorber return loss specified by the European Standards Telecommunication Institute's (ETSI) test standards. As digital circuits increase in speed, EMC compliant testing is being raised to higher frequencies. Anticipating this need, ETS-Lindgren developed FS-980, an anechoic absorber that is numerically optimized to provide the highest attainable reflectivity performance across an ultra broadband frequency range of 30 MHz to 18 GHz.*

    Our FS-980 absorber provides satisfactory reflectivity performance for meeting conventional test site validation method below 1 GHz while providing superior anechoic performance from 300 MHz to 18 GHz. It is anticipated that test sites built with FS-980 absorber treatment will meet test site requirements in both low (30 MHz to 1 GHz) and high-frequency range (above 1 GHz) ranges, using known current and future validation methods. Test sites lined with FS-980 can also be used for immunity measurements, safely handling exposure to continuous RF field intensities up to 540 V/m.

    * Chambers lined with FerroSorb have been demonstrated to perform at frequencies extending up to 40 GHz.

    Product Features
    View the FS-980 FerroSorb EMC Absorberproduct features below

    Manufacturing Process

    FerroSorb FS-980 is manufactured from high quality, low density polyurethane foam that undergoes 15 quality assurance checks during production. The manufacturing process begins with the foam being impregnated with a proprietary, conductive carbon formula. The foam is then cut into a precise curvilinear wedge configuration by a computer controlled saw. The shaped absorber is next bonded to a precision machined ferrite tile with a tuned dielectric layer, and tested.

    Testing Process

    Every piece of FerroSorb undergoes non-destructive reflectivity testing following the recommended square coax test method by IEEE-STD-1128. A vertical coaxial waveguide is used for testing across the 30 MHz to 500 MHz low frequency range. Higher frequency testing is performed using an NRL arch. This thorough testing process assures that FerroSorb FS-980 delivers consistent, repeatable performance.

    Specifications
    View the FS-980 FerroSorb EMC Absorber technical specifications below

    Physical Specifications

    Nominal Weight: 25.0 kg (55.12 lb)
    Overall Height: 100.0 cm (39.37 in)
    Unit Size (Square): 100.0 cm (39.37 in)
    Fire Retardant Ratings: NRL 8093 Tests 1, 2 & 3,TI #2693066, MIT MS-8-21,UL 94 and DIN 4102-B2

    Electrical Specifications

    Frequency Minimum: 30 MHz
    Frequency Maximum: 18 GHz
    Power Handling: 540.0 V/m CW

    Product Options

    Optional FlexSorb™ Treatment

    With FlexSorb, you can enjoy the same excellent performance characteristics as our traditional absorbers, with the advantages of improved durability. FlexSorb is a special absorber treatment that allows an absorber to bend but not break. It's ideal for high traffic areas like chamber doorways and interior walls, or for tests that require an anechoic floor treatment. And, being that FlexSorb is also non-hygroscopic: its weight does not change in the presence of atmospheric moisture.

    Product Configuration

    Frequency Minimum: 30 MHz
    Frequency Maximum: 18 GHz
    Power Handling: 540.0 V/m CW