Key Product Information


​​​Fast Performance

The EMPower Pulse RF/Burst Power Meters perform power measurements at a maximum sampling speed of one million samples per second. By using such a high sampling rate, the power meter is able to measure RF burst/ pulse signals with a duration time as low as 2 μsec. Both power meters are also capable of measuring CW.

Accurate Measurements

EMPower Pulse allows high precision RF measurements with high dynamic range of 65 dB for the 6 GHz model, and 55 dB for the 18 GHz model.

Pulse-shape Recording Mode

In addition to the fast performance, the EMPower Pulse also has an internal measurement buffer that can store 4,000 samples. This enables the user to easily visualize RF burst signals.

Ford Radar Pulse Test

Fast speed and the record mode make the EMPower Pulse suitable for measurements in accordance to the Automotive Ford Standard EMC-CS-2009. 

Specifications Select a tab below for more information



Model
7002-003 (Sensor)​7002-005 (Sensor)
​​Detector Type​
​Diode
Diode​
Measurement Function​Peak Power​Peak Power​
​Calibrated Frequency Range
9 kHz to 6 GHz​80 MHz to 18 GHz​
​​Power Measuring Range​
​​-55 dBm to +10 dBm 
​​-45 dBm to +10 dBm​
​Input Damage Level 
​​>20 dBm​
​>20 dBm
​​Resolution
​ ​0.01 dB
​ ​0.01 dB
​​VSWR 
​​<1.05 @ 10 MHz to 100 MHz
<1.15 @ 100 MHz to 2 GHz
<1.35 @ 2 GHz to 6 GHz​ 
​<1.20 @ 80 MHz to 10 GHz 
<1.35 @ 10 GHz to 18 GHz
​​Maximum Linearity Error (0 dBm ref)​
​ 0.05 dB/10 dB
​ 0.05 dB/10 dB
​​Measuring Speed (Per Second)
​​1 MSps (10 MSps for CW)
100 kSps or 20 kSs (Software Selectable)​ 
​​​​1 MSps (10 MSps for CW)
100 kSps or 20 kSs (Software Selectable)​ 
​Logging Buffer Record Mode
4,000 Samples
2,000 Pre-trigger
2,000 Post-trigger​
​4,000 Samples
2,000 Pre-trigger
2,000 Post-trigger
​​Accuracy (23° ± 2° C) ​
​0.25 dB
​0.25 dB (≤10 GHz) 
0.50 dB (>10 GHz)​
​Temperature Effect ​
​<0.15 dB Over Full Temperature Range 
​<0.15 dB Over Full Temperature Range
​​ ​Measurement Units
​dBm 
​dBm 

Model
7002-001 (Modular Plug-in Card)​ 7002-003 (Sensor)​ 7002-005 (Sensor)​
​Temperature Range (Use)
​​0° C to +40° C
(32° F to 104° F)
​​​0° C to +40° C
(32° F to 104° F)
​​​0° C to +40° C
(32° F to 104° F)
​​Temperature Range (Storage)
​-20° C to +85° C
(4° F to 185° F)
​​-20° C to +85° C
(4° F to 185° F)
​​-20° C to +85° C
(4° F to 185° F)
​​Relative Humidity 
​​10 to 90% (Non-condensing)​
​​10 to 90% (Non-condensing)​
​​10 to 90% (Non-condensing)​
​Connector to Plug-in Card or PC (Data)
​n/a
​USB-B
​USB-B
​USB Communication
​n/a
​USB 1.1
​USB 1.1
​USB Power Consumption
​n/a
​< 200 mA​
​< 200 mA​​
​RF Input Connector ​
​n/a
​​N-type Precision
​​N-type Precision

  • EMPower RF Power Pulse Sensor (Please Specify Model)
  • 2 m Shielded USB Cable
  • Installation CD

 

 

EMCenter™ Modular RF Platform Model 7000 Series​​ETS-Lindgren's EMCenter™ is a modular RF platform consisting of an integrated micro-controller, modular chassis, and a selection of optional plug-in card modules. It can be used to perform a variety of RF measurement applications.
EMControl™ Positioner Controller Plug-in Card Model 7006-01 ​ETS-Lindgren's EMControl™ is a versatile positioner controller which enables the user to synchronize simultaneous movement of two ETS-Lindgren positioning devices (for example, towers or turntables) and On/Off operation of an additional auxiliary device (LISN, EUT, etc.).<br>
EMGen™ RF Signal Generator Model 7003-001 ​​​​​ETS-Lindgren’s EMGen™ RF Signal Generator Plug-in Card offers users a convenient and economical solution for signal generation.
EMPower™ Power Meters Model 7002-006 ETS-Lindgren has extended its range of EMPower RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11™, Bluetooth® and Zigbee™. 
EMPower™ Power Meters Model 7002-00X ​​ETS-Lindgren's EMPower™ Power Meters make fast, accurate power measurements, even at low power levels.
EMPower™ Pulse RF/Burst Power Meter Model 7002-00X ETS-Lindgren's EMPower Pulse RF/Burst Power Meter is designed to perform very fast measurements on high-frequency pulse-shaped signals (RF bursts).
EMSense™ EMF Probe Plug-in Card Model 7007-001 ​ETS-Lindgren EMSense™ EMF Probe Plug-in Card provides an interface for ETS-Lindgren’s battery-powered E-field probes to the EMCenter Modular RF Platform.
EMSense™ EMF Probe Plug-in Card Model 7007-002<p>​​ETS-Lindgren EMSense™ EMF Probe Plug-in Card provides an interface for ETS-Lindgren’s laser-powered E-field probes to the EMCenter Modular RF Platform.</p>
EMSwitch™ RF Switch Plug-in Cards 7001-00X ​​ETS-Lindgren's EMSwitch™ RF Switch Plug-in Cards are general purpose multi-channel switch matrixes, used to switch the RF path of equipment for RF measurement applications, including immunity, emissions, and wireless measurements.

Key Features


 

  • Fast Performance: Up to 1 Million Samples per Second
  • Accurate Measurements with Dynamic Range of:
    • -65 dB for 6 GHz Model (Model 7002-003)
    • -55 dB for 18 GHz Model (Model 7002-005)
  • Pulse-shaped Recording Mode Suitable for Ford Radar Pulse Test

 

 


Literature and Videos


 

 

http://www.ets-lindgren.com/products/test-systems/rf-test-solutions/5010/501005<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/test-systems/rf-test-solutions/5010/501005

L o a d i n g

 Catalog-Item Reuse