Key Product Information


Single Cluster Array

The single cluster multi-antenna array includes dual-polarized Vivaldi antennas mounted to the interior of the test cell. The array is configured with RF-cables inside and outside the test cell to connect antennas to technology-specific communication test equipment through a radio channel emulator.    

Integrated Multi-Axis Positioning System (MAPS)

The included positioning system allows the wireless device under test (DUT) to be rotated through the generated field structure to determine its relative performance in different orientations within the simulated environment.

Amplifiers

8-port Power Amplifier is used to increase the channel emulator output for OTA testing.

Pre-Compliance Testing

If you're using an external test house for certification testing, our system can help you go fully prepared. OTA MIMO performance measurements made in the AMS-8055 have shown good correlation to measurements made in larger, fully compliant chambers.

Compact Anechoic RF Enclosure

The AMS-8055 is an ideal solution when space is a limitation. It can be used as a self-contained test lab for making fast, OTA performance measurements of small wireless devices and mobile handsets for both MIMO and SISO OTA.

Self-Contained Moveable System

The AMS-8055 is incorporated into a moveable chassis: the entire system can be transported between different test stations. The ability to transport the system makes it an ideal solution for use by multiple research and development groups.

Easy Installation

The AMS-8055 is easily installed into new or existing construction. Additionally, the moveable cart assembly allows for the system to be easily relocated within a testing facility.

EMQuest Data Acquisition and Analysis Software

The baseline test suite includes fully automated 2D (polar) and 3D (spherical) pattern measurement capabilities as well as various frequency response measurements for testing both passive antennas and active wireless devices in either transmit or receive mode. General post-processing capabilities include calculation of antenna properties such as half power beam-width, directivity, gain, radiation efficiency, total radiated power, and total isotropic sensitivity, as well as various partial surface performance metrics required by the different OTA test requirements. Data can be exported to Microsoft® Excel and Adobe® PDF files or saved in Microsoft® RTF format.

Specifications Select a tab below for more information



Frequency Range: 700 MHz to 6 GHz
Path Length: 1.5 m 
Positioner: 0.1o Resolution
Electrical (VAC): 208/240 VAC; NEMA 6-15
Voltage (Hz): 50/60 Hz
Amps: 10 A
Plug Type: NEMA or Schuko (Please Select One)
Shield Performance: >100 dB
Shield Material: Aluminum
Dimensions (L x W x H): 2.6 m x 2.6 m x 1.9 m (8.53 ft x 8.53 ft x 6.23 ft)
Shielded Door Dimensions: 73.7 cm x 73.7 cm (29 in x 29 in)
Weight (Nominal): 953 kg (2,100 lb)
  • RF Shielded Enclosure with Single Leaf Manual Door
  • Anechoic Absorbers on all Interior Surfaces Including Flex Coated Absorber in Accessible Regions
  • Integrated Multi Axis Positioning System (MAPS)
  • Free Space and Phantom Head Mounts
  • Fixed Dual Polarized Vivaldi Antenna
  • 8 Port Power Amplifier
  • EMCenter Modular RF Platform for Positioning Control and Switching
  • Ferrite Beaded Cables for Range Calibration
  • Workstation Computer with Intel® Quad-core Processor
  • EMQuest Data Acquisition and Analysis Software
  • Design, Two Days On-site Setup and General Operating Training
  • LTE (MIMO) Test Package
  • Wi-Fi (MIMO) Test Package
  • 2G/3G Cellular SISO Test Package
  • Wi-Fi SISO Test Package
  • LTE-SISO Test Package
  • A-GNSS (A-GPS for 2G/3G) Test Package
  • A-GNSS (A-GPS for 4G) Test Package
  • Bluetooth Test Package
  • Bluetooth Low Energy Test Package
  • TD-SCDMA Test Package
  • RSE Test Package

 

 

AMS-7000 Reverb Antenna Measurement System ​ETS-Lindgren's AMS-7000 Wireless OTA Reverb Test System is designed to perform accurate and repeatable SISO TRP, TIS, Throughput, and MIMO Throughput measurements.
AMS-8040 Antenna Measurement SystemETS Lindgren's AMS-8040 Antenna Measurement System is a self-contained enclosure for making over-the-air testing of wireless devices in free-space.
AMS-8041 Antenna Measurement System<p>​ETS-Lindgren's AMS-8041 is a self-contained enclosure for making wireless device over-the-air performance and passive antenna pattern measurements. </p>
AMS-8050 Antenna Measurement System ETS-Lindgren's Model AMS-8050 Antenna Measurement System supports testing a wide range of portable wireless devices and mobile handsets in free-space or using a head and hands phantoms.
AMS-8055 MIMO Single Cluster Environment Simulator ETS-Lindgren's AMS-8055 MIMO Single Cluster Environment Simulator is a compact, fully anechoic RF enclosure for testing a wide range of portable wireless devices and mobile handsets in free-space or using a simulated human head and hands (optional).
AMS-8100 Antenna Measurement System ETS-Lindgren's AMS-8100 Antenna Measurement System is a compact rectangular test chambers designed for test and measurement of wireless devices.
AMS-8500 Antenna Measurement System ETS-Lindgren's AMS-8500 Antenna Measurement System is a turnkey solution for making compliant Over-The-Air (OTA) performance measurements. This system is ideally suited for automated measurement of antenna performance of wireless devices, and devices with embedded wireless functions as well as traditional antenna pattern measurements for passive antennas.
AMS-8600 Antenna Measurement System ETS-Lindgren's AMS-8600 Antenna Measurement System is a turnkey solution for making CTIA Over-The-Air (OTA) performance measurements for portable wireless devices as well as traditional antenna pattern measurements for passive antennas.
AMS-8800 Series Antenna Measurement System ETS-Lindgren's AMS-8800 Series Antenna Measurement System is a theta arm based  antenna measurement test system. This system is ideally suited for automated measurement of antenna performance of wireless devices, and devices with embedded wireless functions.

Key Features


  • Efficient MIMO Over-the-Air (OTA) Performance Measurement
  • SISO OTA Performance Measurements
  • 2D/3D Antenna Pattern Measurements
  • Frequency Range 700 MHz to 6 GHz
  • Path length: 1.5 m
  • Ideal for Pre-Compliance Testing
  • Compact, Anechoic RF-Enclosure
  • Self-Contained, Moveable Cart System
  • No Special Installation/Construction
  • EMQuest™ Data Acquisition and Analysis Software

Literature and Videos


 

 

http://www.ets-lindgren.com/products/test-systems/antenna-measurement-system/5008/500805<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf">Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/test-systems/antenna-measurement-system/5008/500805<a href="/sites/etsauthor/ProductBrochures/Chambers/Wireless%20Capabilities%20Brochure.pdf"></a>

L o a d i n g

 Catalog-Item Reuse