Key Product Information


Antennas

The AMS-8041 is equipped with a Model 3165-02 dual polarized Vivaldi antenna capable to measure both linear and circular measurements over the frequency range of 400 MHz to 6 GHz. The antenna is mounted on a removable access panel at the top of the enclosure. The antenna can be interchanged with another antenna of a different frequency if needed. Two antennas are used for communication with the DUT.

Two-Axis Positioner

3D antenna measurements can be made for both active and passive antennas using the AMS-8041's two-axis positioner. The positioner is constructed of low- dielectric materials and is designed for hand-held devices weighing up to 1 kg (2.2 lb.). The positioner is controlled by EMQuest™ Software.

Anechoic Absorber

FlexSorb™, a flexible RF absorber that bends and returns to its original form, is used in AMS-8041 to eliminate breakage from extended lab use. The absorber is performance optimized and limits reflections and moding, for more accurate, repeatable measurements. Tapered wedges line the walls, pyramidal absorber is used on the floor, and lossy foam lines the antenna. 

EMQuest Data Acquisition and Analysis Software

The AMS-8041 System includes our versatile EMQ-100 Antenna Pattern Measurement Software. The software makes fully-automated pattern and frequency response measurements for active and passive antennas. Post processing capabilities include calculations for directivity, gain, radiation efficiency, total radiated power and total isotropic sensitivity. EMQ-100 also calculates industry specific quantities such as Near- Horizon Partial Isotropic Sensitivity required by the CTIA Test Plan for Mobile Station Over-the-Air Performance. Advanced graphing capabilities allow data to be shown in a variety of 2D and 3D formats, exported to Microsoft Excel™, PDF files or saved in RTF format.

Specifications Select a tab below for more information



​​​​Frequency Range: 400 MHz to 6 GHz
Cross Polarization: >25 dB
Path Length: 80 cm
Drive System Electrical (VAC): 208/240 VAC; NEMA 6-15
Drive System (Amps): 10 A
Equipment/DUT Electrical (VAC): 115/230 VAC; NEMA 5-15
Equipment/DUT (Amps): 5 A
Voltage (Hz): 50/60 Hz
Plug Type: IEC 320
Shield Performance: >80 dB
Shield Material: Aluminum
Dimensions (L x W x H): 201.4 cm x 87.4 cm x 101.1 cm (79.3 in x 34.4 in x 38.9)
Shielded Door Dimensions (L x W): 48.3 cm x 48.3 cm (19.0 in x 19.0 in)
Weight (Nominal): 261.3 kg (575.0 lb)
​Max DUT Weight: 998 g (2.2 lb)
  • RF Shielded Enclosure
  • Anechoic Tapered Wedge Absorber on Side Walls and Pyramidal Absorber on Ceiling & Floor
  • Integrated 2-axis Positioning System
  • One Dual-polarized Measurement Antenna
  • Two Dual-polarized Communication Antennas
  • Connector Panel with Two SMA, Three Type N Connectors, One BNC for Triggered Acquisition Functionality for DUT I/O
  • EMCenter Modular RF Platform
  • Ethernet Fiber Optic Media Converter
  • Fully Integrated Rack System
  • Workstation Computer with Intel® Quad-core Processor
  • EMQuest EMQ-100 Antenna Measurement Software
  • Design, Two Days On-site Setup and Feneral operating Training
  • 2G/3G Cellular SISO Test Package 
  • WiFi SISO Test Package
  • LTE-SISO Test Package
  • A-GNSS (A-GPS for 2G/3G) Test Package
  • A-GNSS (A-GPS for 4G) Test Package
  • Bluetooth Test Package
  • Bluetooth Low Energy Test Package
  • TD-SCDMA Test Package
  • RSE Test Package

 

 

AMS-7000 Reverb Antenna Measurement System ​ETS-Lindgren's AMS-7000 Wireless OTA Reverb Test System is designed to perform accurate and repeatable SISO TRP, TIS, Throughput, and MIMO Throughput measurements.
AMS-8040 Antenna Measurement SystemETS Lindgren's AMS-8040 Antenna Measurement System is a self-contained enclosure for making over-the-air testing of wireless devices in free-space.
AMS-8041 Antenna Measurement System<p>​ETS-Lindgren's AMS-8041 is a self-contained enclosure for making wireless device over-the-air performance and passive antenna pattern measurements. </p>
AMS-8050 Antenna Measurement System ETS-Lindgren's Model AMS-8050 Antenna Measurement System supports testing a wide range of portable wireless devices and mobile handsets in free-space or using a head and hands phantoms.
AMS-8055 MIMO Single Cluster Environment Simulator ETS-Lindgren's AMS-8055 MIMO Single Cluster Environment Simulator is a compact, fully anechoic RF enclosure for testing a wide range of portable wireless devices and mobile handsets in free-space or using a simulated human head and hands (optional).
AMS-8100 Antenna Measurement System ETS-Lindgren's AMS-8100 Antenna Measurement System is a compact rectangular test chambers designed for test and measurement of wireless devices.
AMS-8500 Antenna Measurement System ETS-Lindgren's AMS-8500 Antenna Measurement System is a turnkey solution for making compliant Over-The-Air (OTA) performance measurements. This system is ideally suited for automated measurement of antenna performance of wireless devices, and devices with embedded wireless functions as well as traditional antenna pattern measurements for passive antennas.
AMS-8600 Antenna Measurement System ETS-Lindgren's AMS-8600 Antenna Measurement System is a turnkey solution for making CTIA Over-The-Air (OTA) performance measurements for portable wireless devices as well as traditional antenna pattern measurements for passive antennas.
AMS-8800 Series Antenna Measurement System ETS-Lindgren's AMS-8800 Series Antenna Measurement System is a theta arm based  antenna measurement test system. This system is ideally suited for automated measurement of antenna performance of wireless devices, and devices with embedded wireless functions.

Key Features


  • Efficient Over-the-Air (OTA) Active and Passive Antenna Pattern Measurement
  • Ideal as a Shared Resource for Pre-compliance Testing
  • Compact Anechoic Absorber-lined RF Enclosure
  • Self-contained with Roll-about Casters for Mobility
  • Frequency Range 400 MHz to 6 GHz
  • Path Length: 80 cm
  • DUT I/O Ports: 
    • 2 SMA Connectors 
    • 2 Type N Connectors 
  • Two-axis DUT Positioner
  • >80 dB RF Isolation
  • Two Communication Antennas
  • No Special Installation of Construction Required
  • Onsite Setup and Training

Literature and Videos


 

 

http://www.ets-lindgren.com/products/test-systems/antenna-measurement-system/5008/500803<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf">Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/test-systems/antenna-measurement-system/5008/500803<a href="/sites/etsauthor/ProductBrochures/Chambers/Wireless%20Capabilities%20Brochure.pdf"></a>

L o a d i n g

 Catalog-Item Reuse