Key Product Information


The SSD offers quiet, fully automatic operation with push button switches. These switches can be located at the MRI console for remote door activation. The linear belt drive operator provides for a smooth, fail-safe, mechanical closing. The servomotor, encoders, and logic hardware are concealed within an architecturally pleasing brushed aluminum transom header. Door leaves are pressure-sensitive and reverse on contract, should the opposing pressure exceed 12.7 kg (28 lb) of force. The cycle speed and braking of the door system can be adjusted for the intended application.

The sliding door system can also be equipped with pressure sensitive mats and unidirectional motion sensors that are activated by the approaching pedestrian traffic. The door system can be supplied with a hold-open safety switch, activated remotely at an operator console location.

During pneumatic operation, the thermal-bonded, tin-coated surfaces expand to create a tight seal that eliminates outside ambient RF noise and helps maintain a sterile environment within the shielded area.

Options include indicator switches that alert technicians of the position of the door. These switches may also be used for MRI scan interconnection to insure shield integrity during scanning procedures.


The factory engineered doors are 5.72 cm (2.25 in) thick. The doors incorporate RF shielding for MRI protection, and can be supplemented with lead shielding for radiation protection.

A heavy-duty through bolted frame construction provides the strength and durability required for automation.

While rugged, the SSD system is architecturally styled for hospital environments. It features attractive hardware, durable mortised hinges for sag-free mounting, and can be finished with an aesthetically pleasing laminate finish.

The system’s fingerless sealing design is virtually maintenance-free and helps assure a sterile environment. This unique seal replaces gaskets, contact fingers, and the service problems associated with their frequent maintenance and replacement. Such problems include broken contact fingers and flattened gaskets. The highly durable fingerless seal consists of a continuous expansion strip concealed within the door’s edge, which achieves a positive RF seal when the doors are closed.


The SSD system provides outstanding attenuation levels that meet or exceed MRI vendor specifications. The sealing mechanism has been cycle tested up to 2 million operations with no failures.

Specifications Select a tab below for more information

AC Service, 50/60 Hz: 1 ph; 100 to 240 VAC/<3a
House Air Supply: 100 psi @10 cfm, Dry, Filtered
Primary Drive Power: House Air
Signal/Control Power: 24 vdc

Door Size (W x H)Open/Close Wall StationsSafety Light CurtainsCollision SensorsE-stop Buttons

HMI Touch Screen

Keyed Lock OutManual OperationFinishes

1.54 m x 2.13 m (5 ft x 7 ft)

Yes, 1 Station;

Optional Add

YesYesYesOptionalOptionalYes#4 Stainless Steel
2.54 x 2.13 m (8.33 ft x 7 ft)


Yes, 1 Station;

Optional Add

YesYesYesOptionalOptionalYes#4 Stainless Steel
2.64 x 3.02 m (8.67 ft x 9.92 ft)


Yes, 1 Station;

Optional Add

YesOptionalOptionalYes#4 Stainless Steel



Auto-Seal™ II Door ​​ETS-Lindgren Auto-Seal™ II offers revolutionary, leading-edge MRI door technology in a lightweight, mechanically operated, high performance shielded door. The Auto-Seal II (AS-II) is available in three distinct door configurations: RF-Shielded, Acoustic and Fire-Rated.
EVO MRI Door <p>​ETS-Lindgren's new EVO series of MRI RF doors are designed to provide reliable, low maintenance service for use in a rigorous MRI environment in both manual and pneumatic configurations. </p>
Intra-Operative Sliding Door (IOSD)​ETS-Lindgren’s family of RF sliding doors includes the Intra-Operative Sliding Door (IOSD), the Dual Modality Sliding Door and the Single Slide Sliding Door.
MRDS Door ​ETS-Lindgren's MRDS Door is designed to provide a reliable, economical door for your MRI facility. Similar to ETS-Lindgren's other RF doors, the MRDS is designed to be lightweight to allow for easy operation.
RF Windows ClearShield® Window Design <p>​ETS-Lindgren's ClearShield<sup>®</sup> High-Visibility Architectural RF Windows expand the horizons of your MRI shielded enclosure. The patented ClearShield RF window design offers the industry’s best combination of performance and clarity.</p>
Safe IV Port for Medical Applications ​ETS-Lindgren’s Safe IV Port (SIVP) is a cylindrical waveguide that provides safe and easy passage of intravenous (IV) lines into an MRI room, without compromising the RF shield.
Sliding Shielded Door (SSD) ​ETS-Lindgren's Sliding Shielded Doors (SSD), answer the growing need for bi-parting special access door requirements in medical applications. <br>

Key Features

  • Allows Easy Transport Between Adjacent Medical Suites:
    • MRI
    • X-ray
    • Angiography
    • OR
    • CT
  • Fully Automatic Door System with Flat Threshold 
  • Maintains Sterile Environment Due to Fingerless Sealing Design
  • Features RF Shielding for Medical Applications 
  • Satisfies RF Performance of all MRI Equipment Suppliers
  • Reliable Pneumatic and Logic System Utilizing an Exclusive Fail-safe Operating Mechanism

Literature and Videos<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/MRI%20Full%20Line%20Brochure.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />MRI_Full_Line_Brochure.pdf</a>

L o a d i n g

 Catalog-Item Reuse