Welded Fabrication Enclosures

ETS-Lindgren's Welded Fabrication Enclosures combine the welded fabrication concept with full-service capabilities ranging from initial consultation, design, engineering, and fabrication to final testing certification to provide maximum shielding effectiveness over many years of service.

 

 


ETS-Lindgren's Welded Fabrication Enclosures combine the welded fabrication concept with full-service capabilities ranging from initial consultation, design, engineering, and fabrication to final testing certification to provide maximum shielding effectiveness over many years of service.​ In demanding RF shielding applications including automotive testing complexes, large computer facilities, EMP testing sites, 3m to 10m EMC chambers, and metrology complexes requiring higher RF performance and broader frequency range protection, shielding reliability is imperative. ETS-Lindgren's welded fabrication enclosures combine the welded fabrication concept with full-service capabilities ranging from initial consultation, design, engineering, and fabrication to final testing certification to provide maximum shielding effectiveness over many years of service.

Key Product Information


Superior Single Shield Design

To ensure the highest shielding performance, ETS-Lindgren's all-welded shielded room concept typically uses a single layer of high grade hot rolled steel sheet material in sizes designed to minimize seam footage. It is constructed using varying steel in thicknesses from 1.905 mm (.075 in) to 12.70 mm (.500 in).

Structural Framework

The structural framework of the welded shielded room is freestanding and conforms to the Uniform Building Code (UBC) and the latest American Institute of Steel Construction (AISC) standards.

RF Seam and Joint Integrity 

ETS-Lindgren's all-welded room design does not have any mechanical seams that can result in high maintenance and serious loss of shielding effectiveness. The welded seams are unaffected by corrosion, oxidation and mechanical expansion brought about by temperature and humidity changes.

High RF Attenuation 

ETS-Lindgren's all-welded shielded room design has set the standard for reliable shielding performance in the industry's most demanding applications. It exceeds the RF performance requirements of government specifications MIL-STD 285, IEEE 299, NSA 65-6/NSA 94-106 and CID 09.12 as well as commercial needs. This pre-engineered, all-welded shielding concept offers long-term, maintenance-free RF performance and superior structural integrity to support shielding requirements from 30 Hz to 94 GHz and above.

Portable All-Welded Buildings 

Smaller all-welded shielded rooms can be built on rollers, or may be set up with lifting hooks or on a base platform, to allow transport by truck, helicopter, air transport, or forklift to a selected site. The ability to relocate the shielded environment as needed makes the portable all-welded design an economical and ideal choice for many military and commercial applications. 

Portable all-welded rooms are available up to a maximum size of 3.048 m Wide x 3.048 m High x 12.192 m Long (10 ft x 10 ft x 40 ft).

Specifications Select a tab below for more information



  • Pneumatic operation systems PNL-1 and PNL-3
  • Custom Sizes
  • Slope Ramp System in Front
  • Microswitch Indicating the RF-tight Open/Closed Status of the Door
  • Locking Systems: 
    • Code Lock, 
    • Card Lock, etc. (Requires PNL-3 Operation System)
​​

 

 

Series 81 Shielded Rooms http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100302Series 81 Shielded Rooms
EMP Mitigation-Red Edge Pulse Protectionhttp://www.ets-lindgren.com/products/shielding/government-shielding/rf-shielded-enclosures-for-gov/11003/1100309EMP Mitigation-Red Edge Pulse Protection
DEI Enclosures http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100301DEI Enclosures
Series 71 Shielded Rooms http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100303Series 71 Shielded Rooms
Welded Fabrication Enclosures http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100305Welded Fabrication Enclosures
5240 Table Top Test Enclosure for Industrial Config http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/11003045240 Table Top Test Enclosure for Industrial Config
Series 101 Shielded Rooms http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100306Series 101 Shielded Rooms
Series 83 Shielded Rooms http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100307Series 83 Shielded Rooms

Key Features


  • Single Layer High Grade Steel Material 
  • Welded Seams Unaffected by Corrosion, Oxidation, and Mechanical Expansion
  • 30 Hz to 94 GHz and Above 
  • MIL-STD 285, IEEE 299, NSA 65-6/NSA 94-106, CID 09.12

Literature and Videos


 

 

http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100305<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/shielding/industrial-shielding/rf-shielded-enclosures/11003/1100305

L o a d i n g

 Catalog-Item Reuse