RF Reverberation Chamber Tuner
​​​ETS-Lindgren's RF Reverberation Chamber Tuners are designed with multiple reflecting surfaces at complex angles, to provide a highly stirred environment with minimal angular changes. Tuners can be sized for match any chamber and supports stirred or stepped operation.

 

 


​​​​​ETS-Lindgren's RF Reverberation Chamber Tuners are designed with multiple reflecting surfaces at complex angles, to provide a highly stirred environment with minimal angular changes. Tuners can be sized to match any chamber and will support stirred or stepped operation. ETS-Lindgren's RF Reverberation Chamber Tuners are made of large aluminum reflecting sheets supported on either a rigid box (truss) frame or a single spine depending on the overall size. They are designed to provide the efficient loss reflecting surfaces necessary for use in RF reverberation chambers. 

Reverberation Chamber Tuners are available as separate assemblies for retrofitting to existing shielded facilities. These Tuners are supplied with matched motor drives, capable of up to 16 RPM for use in continuous rotation mode or with down to 0.1 degree resolution for use in tuned mode. 

Most shielded rooms can be converted to reverberation chambers with the installation of one or more suitably sized automatically controlled tuners. The chamber should ideally have dimensions which are not integer multiples of each other to reduce mode degeneracy, and be large enough to support multiple modes.

Key Product Information


Specifications Select a tab below for more information



Tuner TypeQuantitySize (L= Length to Order)Lowest Typical Frequency Typical Chamber Dimensions (Approx.)
060620.15 m x 0.15 m x L1 GHz1.5 m x 1.0 m x 0.8 m
0.5 ft x 0.5 ft x L4.92 ft x 3.28 ft x 2.63 ft
151510.38 m x 0.38 m x L 700 MHz2.0 m x 1.2 m x 1.5 m
1.25 ft x 1.25 ft x L6.56 ft x 3.93 ft x 4.92 ft
484811.22 m x 1.22 m x L 100 MHz8.4 m x 5.6 m x 3.05 m
4.0 ft x 4.0 ft x L27.56 ft x 18.37 ft x 10.00 ft
 
606021.52 m x 1.52 m x L80 MHz13.0 m x 6.0 m x 5.0 m
5.0 ft x 5.0 ft x L42.65 ft x 19.69 ft x 16.40 ft
727221.83 m x 1.83 m x L 60 MHz18.0 m x 15.0 m x 7.0 m
6.0 ft x 6.0 ft x L59.06 ft x 42.21 ft x 22.97 ft

 

 

SMART™ 80 Reverb Chambers http://www.ets-lindgren.com/products/chambers/emc-chambers/smart™-reverb-chambers/5007/500703SMART™ 80 Reverb Chambers
RF Reverberation Chamber Tuner http://www.ets-lindgren.com/products/chambers/emc-chambers/smart™-reverb-chambers/5007/500701RF Reverberation Chamber Tuner
SMART™ 200 Reverb Chambers http://www.ets-lindgren.com/products/chambers/emc-chambers/smart™-reverb-chambers/5007/500702SMART™ 200 Reverb Chambers

Key Features


  • Robust Lightweight Construction
  • Short Settling Time
  • Efficient RF Scattering
  • Sizes to Match Chamber Size
  • Cross Section Based on Operating Frequency

Literature and Videos


 

 

http://www.ets-lindgren.com/products/chambers/emc-chambers/smart™-reverb-chambers/5007/500701<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/chambers/emc-chambers/smart™-reverb-chambers/5007/500701

L o a d i n g

 Catalog-Item Reuse