3163 High Gain Conical Horn Antennas
ETS-Lindgren's Series 3163 Series Conical Horns are high gain (over 16 dBi) antennas, designed for use as feeds in tapered anechoic chambers, as well as in applications requiring high gain and linear polarization.

 

 


ETS-Lindgren's Series 3163 Series Conical Horns are high gain (over 16 dBi) antennas, designed for use as feeds in tapered anechoic chambers, as well as in applications requiring high gain and linear polarization. These high gain horns exhibit improved reflectivity levels in the quiet zone (QZ) of tapered chambers, with low VSWR across the range. For flexible use, the 3163 series can be mounted directly into the feed section of a tapered chamber, or mounted to a tripod and used in a rectangular chamber.

Key Product Information


Conica​​l Shape

The conical shape of these horns make them ideal for use in the feed section of tapered chambers. When back-mounted and attached to a rotator at the feed of the taper chamber, their design allows for rotation inside the conical feed sections. Flared angles on these antennas allow for easy positioning along the feed section to obtain the best possible illumination of the Quiet Zone (QZ).

Octave Frequency Range 

The series features four horns, models 3163-03 (C band), 3163-04 (X band), 3163-05 (Ku Band) and 3163-06 (K band), covering a frequency range of 4 GHz to 26.5 GHz.

High Gain, Low VSWR

These horns exhibit high gain performance, with the C band horn (model 3163-03) having a gain of 16 dBi or higher across the range. The X to K band horns exhibit gain increasing gain from 16.5 to 25 dBi. The VSWR of these horns is low, with an average level of less than 1.5:1 for most of the range. The VSWR may be higher at the edges of the band of the horns but never exceeding 3.2:1.​ 

Specifications Select a tab below for more information




​Model
​Frequency Range
​VSWR Ratio (AVG)
​Maximum Continuous Power
​Impedance (Nominal)
​Connectors
​3163-03
​4 GHz to 8 GHz
​3.2:1 Maximum;
1.5:1 Average
​250 watts
​50 Ω
​Type N (F)
​3163-04
​8 GHz to 12 GHz
​2.5:1 Maximum;
1.5:1 Average
​250 watts
​​50 Ω
​Type N (F)
​3163-05
​12 GHz to 18 GHz
​2:1 Maximum;
1.25:1 Average
200 watts
​​50 Ω
​Type N (F)
​3163-06
​18 GHz to 26.5 GHz
​2:1 Maximum;
1.25:1 Average
50 watts
​​50 Ω
​SMA (F)


​Model
​Aperture Diameter
​Length (Without Mount)
​Weight
​3163-03
​17.8 cm (7.01 in)
​60 cm (23.62 in)
​1.8 kg (4.0 lb)
​3163-04
​10.2 cm (4.02 in)
​37 cm (14.57 in)
​0.5 kg (1.2 lb)
​3163-05
​10.2 cm (4.02 in)
​39 cm (15.35 in)
​0.6 kg (1.4 lb)
​3163-06
​10.2 cm (4.02 in)
​38 cm (14.96 in)
​0.5 kg (1.2 lb)

  • Coaxial to Waveguide Adapter
  • Mount for Tripod
  • Individually Calibrated at 3 m per ANSI C63.5. Actual antenna factors/gain uncertainty values and a signed Certifcate of Calibration Conformance included with manual
  • Manual
  • Custom Carrying Case
  • ETS-Lindgren Offers Several Non-metallic, Non-reflective Tripods

 

 

3163 High Gain Conical Horn Antennas http://www.ets-lindgren.com/products/antennas/high-gain-conical-horn-antennas/4008/4008013163 High Gain Conical Horn Antennas

Key Features


  • Frequency Range: 4 GHz to 26.5 GHz 
  • Conical Horn
  • High Gain 
  • Low VSWR

Literature and Videos


 

 

http://www.ets-lindgren.com/products/antennas/high-gain-conical-horn-antennas/4008/400801<a href="/sites/etsauthor/ProductBrochures/General%20Brochures/Test_and_Measurement_Full_Line.pdf"><img alt="" src="/_layouts/15/IMAGES/icpdf.png" />Test_and_Measurement_Full_Line.pdf</a>

 

 

http://www.ets-lindgren.com/products/antennas/high-gain-conical-horn-antennas/4008/400801

L o a d i n g

 Catalog-Item Reuse