3160-10 Rectangular Waveguide Horn Antenna with Pre-Amplifier
Product Image

ETS-Lindgren's model 3160-10 with pre-amplifier (120722) is a special version of our popular model 3160-10 Rectangular Waveguide Horn Antenna, fitted with a pre-amplifier package and calibrated as a single unit.

Key Features
  • Ideal as a receive antenna for emissions testing for 26.5 - 40 GHz
  • Maintains single lobe radiation
  • Provides low AF that is less than -20 dB (1/m) typical for the entire frequency range

The 3160-10 w/Pre-amplifier antenna (120722) is a special version of our popular model 3160-10 Rectangular Waveguide Horn Antenna, fitted with a pre-amplifier package and calibrated as a single unit. By doing this, any possible mismatches between antenna and pre-amplifier are taken into account in the antenna factor (AF), which is provided with this unit. The antenna is ideal as a receive antenna for emissions testing for 26.5 - 40 GHz.

Product Features
View the 3160-10 Rectangular Waveguide Horn Antenna with Pre-Amplifier product features below

Frequency Range

This antenna covers the 26.5 GHz to 40 GHz range when fitted with the pre-amplifier. The range is determined by the pre-amplifier module. The range makes it ideal as a receive antenna for any emissions testing above 26.5 GHz.

Maintains Single Lobe Radiation

Like the model 3160-10, the model 120722 maintains a single main lobe pattern in the direction of the horn axis over its frequency range. This characteristic is essential for even distribution of electromagnetic energy on a target surface, and accurate measurement of gain and emissions.

Fitted Amplifier

The pre-amplifier attached to the antenna has a frequency range of 26.5 GHz to 40 GHz and a typical gain of 55 dB. The gain flatness across the range is 2 dB and the noise figure is 5.5 dB over 26.5 GHz to 40 GHz. The output power compression is +15 dBm. The input and output characteristics of the pre-amplifier are an input and output VSWR of 1.85: 1 / 2.0: 1 maximum. The operating temperature ranges from -40C to +75C (-40F to +167F).

Low Antenna Factor

The result of matching the model 120722 with the pre-amplifier is an antenna that is calibrated as a system and it provides an extremely low AF that is less than -20 dB (1/m) typical for the entire frequency range.

Specifications
View the 3160-10 Rectangular Waveguide Horn Antenna with Pre-Amplifier technical specifications below

Electrical Specifications

Frequency Minimum: 26.5 GHz

Frequency Maximum: 40 GHz

VSWR (Average): N/A (Rx Only)

Maximum Continuous Power: N/A (Rx Only)

Impedance (Nominal): 50

Connector: K (2.92 mm, Female)

Polarization: Linear

Pattern Type: Directional

Product Configuration

  • Antenna and Pre-amplifier
  • Mounting Fixture for x 20 Thread Stinger Mount
  • AC/DC Power Supply for the Pre-amplifier Module
  • Individually calibrated at 1 m per SAE ARP 958 at our A2LA accredited lab
  • Actual Antenna Factors and a Signed Certificate of Calibration Conformance Included with Manual
  • Manual
Request a QuoteView Manual

Literature and Videos