EMC Chambers| ETS-Lindgren

FACT™ Chambers

FACT™ 3 with 2 M QZ Chambers | Datasheet
ETS-Lindgren's FACT™ 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
FACT™ 10 Chambers | Datasheet
ETS-Lindgren FACT™ 10 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
FACT™ 25 CISPR Chambers
ETS-Lindgren's FACT™ 25 CISPR Chambers offer semi-anechoic radiated emissions (RE) compliance testing over a frequency range of 70 MHz to 18 GHz. The chamber is used for vehicle component level testing in accordance with CISPR 25.
FACT™ 5 Chambers
ETS-Lindgren FACT™ 5 Chambers offer the ability to perform radiated emissions testing at a 5 meter distance. While not required by any current standard, measurements made at a 5 meter distance have better correlation to those obtained at a 10 meter distance. While permitting 5 meter testing, these chambers preserve the ability to perform full compliance testing of applicable 3 meter standards.

SpaceSaver™ 26 Chamber | Datasheet
The SpaceSaver™ 26 is a space saving, multi-use EMC test chamber designed primarily for IEC 61000-4-3, and EN 61000-4-3 RI compliance measurements, with secondary application for RE pre-scans per ANSI C63.4-2000 (with limited scan Height.
SpaceSaver™ 26H Chamber | Datasheet
The SpaceSaver™ 26H is a space saving, multi-use EMC test chamber designed to perform IEC 61000-4-3, and EN 61000-4-3 RI compliance measurements. The SpaceSaver™ 26H can also be used for ANSI C63.4-2000 RE pre-scans (with limited scan Height.
SpaceSaver™ PC Chamber | Datasheet
The SpaceSaver^TM PC can be used for making pre-compliance radiated emissions measurements over the frequency range of 30 MHz to 3 GHz.

Anechoic Chamber | Datasheet
ETS-Lindgren Anechoic Chambers provide a precision-grade free-field environment used to measure sound source directivity, frequency response, and noise emissions from spherically radiating sound sources. Some examples of devices that require an anechoic environment include loudspeakers, microphones, and telephones.

MIL-STD 461E/F Chambers | Datasheet
ETS-LINDGREN’S MIL-STD-461E/F CHAMBER is designed for testing in accordance with the military standard. The chamber’s shell is constructed with Series 81TM modular cell-type shielding panels. Interior end walls, portions of the sidewalls and ceiling are lined in the manner required by MIL-STD-461E/F, using EMC-24PCL absorber.

RF Reverberation Chamber Tuner | Datasheet
ETS-Lindgren's Tuners are made of large aluminum reflecting sheets supported on either a rigid box (truss)frame or a single spine and designed to provide the efficient reflecting surfaces necessary for use in a RF reverberation chamber.
SMART™ 200 Reverb Chambers | Manual
The ETS-Lindgren SMART^TM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber construction to create an electromagnetic environment (EME) for immunity testing.
SMART™ 80 Reverb Chambers | Manual
The ETS-Lindgren SMART^TM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber construction to create an electromagnetic environment (EME) for immunity testing.