Solutions for


Find a Rep or Distributor

Home /  Categories /  Test Systems / 

EMPower™ Power Meters Model 7002-006 All Info

EMPower™ Power Meters Model 7002-006

ETS-Lindgren's has extended its range of EMPower™ RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11TM, Bluetooth® and Zigbee™. The model 7002-006 provides measurements over a frequency range from 10 MHz up to 6 GHz.

Print Version Print Version
EMPower-7002-006 Datasheet Product Datasheet

Key Features

  • Fully Compliant with ETSI 300 328 and 301 893
  • Fast, Accurate Performance
  • Easy Operation
  • Burst Mode

Description

ETS-Lindgren's has extended its range of EMPower™ RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11TM, Bluetooth® and Zigbee™. The model 7002-006 provides measurements over a frequency range from 10 MHz up to 6 GHz.

To achieve the measurement requirements of the standards, the sampling speed of the EMPower Pulse power heads has been increased to a maximum of 5 MS/s. A hardware trigger input/ output has also been added to allow synchronous power measurements of wideband data transmission devices with multiple inputs/outputs (MIMO).

The EMPower is equipped with an USB interface which enables direct connection of the Power heads to a PC USB port.

The EMPower model 7002-006 offers a burst mode, compliant with the measurement methods as defined in the ETSI standards for wideband data transmission systems EN 300 328 (2.4 GHz) and EN 301 893 (5 GHz).

In burst mode, the EMPower can store the information of 100.000 bursts and observation time up to 60 seconds. For each burst the average power and timing data is stored in the buffer. The model 7002-006 uses a sample speed of 1 or 5 MSps in combination with a RMS detector to ensure correct measurements on wideband modulating transceivers.

For MIMO devices multiple model 7002-006 power meters units can be daisy-chained using the MMCX connectors enabling synchronised triggering of the EMPower meters.

 EMPower Viewer Comes Standard with the Model 7002-006

EMPower Head

Detector Type

RMS Log Detector

Measurement Function

RMS CW Power, Peak (Max Hold) and Burst Mode

Calibrated Frequency Range

10 MHz to 6 GHz

Power Measuring Range

-50 dBm to +10 dBm

Maximum SWR

1.05 @ Below 1 GHz
1.15 @ 1 GHz to 6 GHz

Frequency Response Accuracy (at 23° C ± 2° C)

±0.25 dB

Deviation from CW for Wideband Modulated Signals wtih High Crest Factor

0.25 dB

Linearity Error

0.05 dB + 0.005 dB/dB

Input Damage Level

> +20dB

Resolution

0.01 dB

RF Input Impedance

50 Ohm

Measuring Speed

Max. 5 MS/s

Temperature Effect

0.15 dB over Full Temperature Range

Zero Adjustment

Not Required

Frequency Response Correction

Stored Frequency Response Data is Taken into Account by Numerical Entry of the Measurement Frequency

Measurement Units

dBm/Watt

Mechanical

Dimensions of Measuring Device

124 mm (L) x 32 mm (W) x 32 mm (H)
4.8 in x 1.3 in x 1.3 in

RF Input Connector

Precision N-Type

Data Connector (Power Head Side)

USB Mini Type B

Trigger Input and Output

MMCX (Standard One Cable Supplied with Each Unit)

Environmental (Head)

Temperature Range (Use)

0°C to 40°C
32°F to 104°F

Temperature Range (Storage)

-20°C to 85° C
-4°F to 185°F

Relative Humidity (Non-condensing)

10 to 90%

Interfaces and Supply (Head)

USB Communication

USB2, Drivers Supplied for Latest Windows® Versions

Supply Voltage

+5 VDC from USB Port (4.75 VDC to 5.25 VDC)

Current Consumption (USB)

Typical 180 mA (maximum 200 mA)

Warranty

3 Years

USA FINLAND UK FRANCE CHINA JAPAN ONLINE
Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel+ 81.3.3813.7100 info@ets-lindgren.com
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specification.