Solutions for

Find a Rep or Distributor

Home /  Categories /  Probes & Monitors / 

95236-1 Current Probe All Info

95236-1 Current Probe

The Model 95236-1 probe is designed to inject current into wire bundles.

Print Version Print Version
95236-1 Manual Product Manual


The probe's operating frequency range is 10 kHz to 100 MHz. This probe is most efficient from about 15 kHz to 4 MHz. The 95236-1 probe cover the low frequency portion of RTCA/DO-160C RF conducted susceptibility requirements and MIL-STD-461D I MIL-STD-462D CS114 (10 kHz · Z MHz).

The Model 95236-1 probe has a 1.6" window, making it suitable for injecting current into most power or signal cables. (AWG 4/0 cable, good for several hundred Amps, is 12.7 mm (0.5 in) diameter, exclusive of insulation.) 100 Watts of cw RF power may be driven into the probe in the injection mode.

Electrical Specifications

Frequency Minimum 10 kHz
Frequency Maximum 100 MHz
Maximum Power 100 W

Physical Specifications

Outside DIA 10.2 cm   (4.02 inches)
Weight 1.6 kg   ( 3.53 lb )
Width 6 cm   (2.36 inches)
Window DIA 4 cm   (1.57 inches)


Technical Charts

95236-1 Current Probe Insertion Loss (Typical)

Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44(0)1438.730700 Tel + Tel +8610.8275.5086 Tel+ 81.3.3813.7100
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44(0)1438.730751 Fax + Fax +8610.8275.5537 Fax +81.3.3813.8068

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specification.