- Controls up to 2 ETS-Lindgren Positioners* Plus 2 Auxiliary Devices
- Manual & Software Control
- Accurate Seek & Scan
- Variable Speed Control
- Compatible Command Set for ETS-Lindgren’s Model 2090 Controller
ETS-LINDGREN’S EMControl is a versatile positioner controller which enables the user to synchronize simultaneous movement of two ETS-Lindgren positioning devices (for example, towers or turntables) and On/Off operation of an additional auxiliary device (LISN, EUT, etc.)
Multiple Device Control
Using one slot in the EMCenter™ Modular RF Test Platform, the EMControl is a modular plug-in card providing a complete solution for automating positioner operation.
Each EMControl modular plug-in card is capable of controlling two primary positioners. For applications with more than two positioners, additional EMControl cards can be added to the EMCenter.
Operation of positioning devices can be performed manually through front panel controls on the EMCenter touchscreen interface.
Featuring an ETS-Lindgren Model 2090 compatible command set, EMControl is fully supported by TILE!™ and other test automation software packages via RS-232, LAN, USB, or IEEE-488.
Accurate Variable Speed Positioner Control
The EMControl allows a target location to be entered manually or under software control to redirect the device from its current location to another position.
The EMControl incorporates advanced acceleration and deceleration algorithms required to accurately control variable, high speed drives.
EMControl is fully compatible with ETS-Lindgren positioners.*
Two additional fiber optic ports are available to remotely control open and close contacts on auxiliary devices (LISN, EUT, etc.).
* For towers and turntables manufactured by ETS-Lindgren in 2005 or later. Call ETS-Lindgren to confirm serial number.